{
  "block": 106149945,
  "op": [
    "delegate_vesting_shares",
    {
      "delegatee": "ricar27",
      "delegator": "steem",
      "vesting_shares": "7119.562572 VESTS"
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2026-05-18T05:41:30",
  "trx_id": "3ef5a3d6decc843a442d59748a07e8625aa827ba",
  "trx_in_block": 1,
  "virtual_op": 0
}

{
  "block": 106002167,
  "op": [
    "delegate_vesting_shares",
    {
      "delegatee": "ricar27",
      "delegator": "steem",
      "vesting_shares": "4407.352167 VESTS"
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2026-05-13T01:56:15",
  "trx_id": "4147a90784b10681ff19cfc623880cb699124396",
  "trx_in_block": 1,
  "virtual_op": 0
}

{
  "block": 105517446,
  "op": [
    "delegate_vesting_shares",
    {
      "delegatee": "ricar27",
      "delegator": "steem",
      "vesting_shares": "7132.078328 VESTS"
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2026-04-26T04:54:09",
  "trx_id": "d34c2790ed4f9452c79577bd7e23cee4b1b035f1",
  "trx_in_block": 2,
  "virtual_op": 0
}

{
  "block": 102869338,
  "op": [
    "delegate_vesting_shares",
    {
      "delegatee": "ricar27",
      "delegator": "steem",
      "vesting_shares": "4448.898986 VESTS"
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2026-01-23T22:25:51",
  "trx_id": "26e5304a1b5713292f9b97627068abcfa2f58338",
  "trx_in_block": 6,
  "virtual_op": 0
}

{
  "block": 91315564,
  "op": [
    "delegate_vesting_shares",
    {
      "delegatee": "ricar27",
      "delegator": "steem",
      "vesting_shares": "4613.118183 VESTS"
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2024-12-17T17:36:30",
  "trx_id": "c6fcab55cfee4a8bbef370e03d86aec1618e4873",
  "trx_in_block": 2,
  "virtual_op": 0
}

{
  "block": 79869713,
  "op": [
    "delegate_vesting_shares",
    {
      "delegatee": "ricar27",
      "delegator": "steem",
      "vesting_shares": "4782.251715 VESTS"
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2023-11-14T09:17:42",
  "trx_id": "d9f577dc7374e05dda84d00f9d064b458eaca996",
  "trx_in_block": 2,
  "virtual_op": 0
}

{
  "block": 78362022,
  "op": [
    "delegate_vesting_shares",
    {
      "delegatee": "ricar27",
      "delegator": "steem",
      "vesting_shares": "7719.160501 VESTS"
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2023-09-22T09:41:12",
  "trx_id": "434c3fb573f8d22571cac481ffcbf34e6efe6dc1",
  "trx_in_block": 0,
  "virtual_op": 0
}

{
  "block": 69119870,
  "op": [
    "delegate_vesting_shares",
    {
      "delegatee": "ricar27",
      "delegator": "steem",
      "vesting_shares": "7941.211939 VESTS"
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2022-11-03T17:14:15",
  "trx_id": "6a2fbf6b505d0da8299232bc1615c78c0372ce2e",
  "trx_in_block": 3,
  "virtual_op": 0
}

{
  "block": 60823189,
  "op": [
    "delegate_vesting_shares",
    {
      "delegatee": "ricar27",
      "delegator": "steem",
      "vesting_shares": "8161.319540 VESTS"
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2022-01-17T22:29:42",
  "trx_id": "054d09632ebab86c08a0cf6144b4418fe1b57b3b",
  "trx_in_block": 6,
  "virtual_op": 0
}

{
  "block": 54613548,
  "op": [
    "delegate_vesting_shares",
    {
      "delegatee": "ricar27",
      "delegator": "steem",
      "vesting_shares": "8345.513828 VESTS"
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2021-06-14T05:42:12",
  "trx_id": "9131e8aeae840468f5e9d7eb9ee4d42438f778ec",
  "trx_in_block": 5,
  "virtual_op": 0
}

{
  "block": 49360827,
  "op": [
    "delegate_vesting_shares",
    {
      "delegatee": "ricar27",
      "delegator": "steem",
      "vesting_shares": "8532.935802 VESTS"
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2020-12-11T15:54:57",
  "trx_id": "5deb6874d52b5c13eccbe3d155568e3d1de302af",
  "trx_in_block": 0,
  "virtual_op": 0
}

{
  "block": 49212357,
  "op": [
    "delegate_vesting_shares",
    {
      "delegatee": "ricar27",
      "delegator": "steem",
      "vesting_shares": "1912.543513 VESTS"
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2020-12-06T09:30:54",
  "trx_id": "0b3892c9c60f678ed498cb9701c42b388dc3cbd3",
  "trx_in_block": 1,
  "virtual_op": 0
}

{
  "block": 49195914,
  "op": [
    "delegate_vesting_shares",
    {
      "delegatee": "ricar27",
      "delegator": "steem",
      "vesting_shares": "8539.143656 VESTS"
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2020-12-05T19:32:54",
  "trx_id": "36f7abe45ed9b52640a51441b4bd6d193196ed91",
  "trx_in_block": 4,
  "virtual_op": 0
}

{
  "block": 48269572,
  "op": [
    "delegate_vesting_shares",
    {
      "delegatee": "ricar27",
      "delegator": "steem",
      "vesting_shares": "1920.017158 VESTS"
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2020-11-03T01:38:09",
  "trx_id": "11dc9f3e3846b55490e3a766cd277dfe2431da32",
  "trx_in_block": 6,
  "virtual_op": 0
}

{
  "block": 43222676,
  "op": [
    "delegate_vesting_shares",
    {
      "delegatee": "ricar27",
      "delegator": "steem",
      "vesting_shares": "8741.949015 VESTS"
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2020-05-09T10:33:24",
  "trx_id": "6b6e2bf2fbe8037bd00c12031370b401527fc2c4",
  "trx_in_block": 8,
  "virtual_op": 0
}

{
  "block": 43199630,
  "op": [
    "delegate_vesting_shares",
    {
      "delegatee": "ricar27",
      "delegator": "steem",
      "vesting_shares": "1953.311140 VESTS"
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2020-05-08T14:53:00",
  "trx_id": "d419c387957b376a04c5f602339a9944c07c507f",
  "trx_in_block": 4,
  "virtual_op": 0
}

{
  "block": 42568744,
  "op": [
    "delegate_vesting_shares",
    {
      "delegatee": "ricar27",
      "delegator": "steem",
      "vesting_shares": "8754.836463 VESTS"
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2020-04-16T02:56:36",
  "trx_id": "311c32acaf36b5c4c59d101cc74bea5153a5d38a",
  "trx_in_block": 4,
  "virtual_op": 0
}

{
  "block": 39815957,
  "op": [
    "transfer",
    {
      "amount": "0.001 STEEM",
      "from": "steembeem",
      "memo": "✨ Awesome Community Service: automated post booster and passive curation earning and more! checkout http://www.steembeem.com",
      "to": "ricar27"
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2020-01-10T20:48:06",
  "trx_id": "dd1d16199fb041b9e370a03b9bf92e561cb74a2b",
  "trx_in_block": 12,
  "virtual_op": 0
}

{
  "block": 39815939,
  "op": [
    "comment",
    {
      "author": "steemitboard",
      "body": "Congratulations @ricar27! You received a personal award!\n\n<table><tr><td>https://steemitimages.com/70x70/http://steemitboard.com/@ricar27/birthday2.png</td><td>Happy Birthday! - You are on the Steem blockchain for 2 years!</td></tr></table>\n\n<sub>_You can view [your badges on your Steem Board](https://steemitboard.com/@ricar27) and compare to others on the [Steem Ranking](https://steemitboard.com/ranking/index.php?name=ricar27)_</sub>\n\n\n###### [Vote for @Steemitboard as a witness](https://v2.steemconnect.com/sign/account-witness-vote?witness=steemitboard&approve=1) to get one more award and increased upvotes!",
      "json_metadata": "{\"image\":[\"https://steemitboard.com/img/notify.png\"]}",
      "parent_author": "ricar27",
      "parent_permlink": "jeep-liberty-2008-2012-window-regulator-replacement-tutorial",
      "permlink": "steemitboard-notify-ricar27-20200110t204709000z",
      "title": ""
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2020-01-10T20:47:09",
  "trx_id": "eaf0951054a0ed6521d384690a4dcff324af4f6f",
  "trx_in_block": 17,
  "virtual_op": 0
}

{
  "block": 32851674,
  "op": [
    "delegate_vesting_shares",
    {
      "delegatee": "ricar27",
      "delegator": "steem",
      "vesting_shares": "8950.453276 VESTS"
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2019-05-12T20:03:39",
  "trx_id": "511516d26ea3e1a185690c9470d080c553a1fadc",
  "trx_in_block": 9,
  "virtual_op": 0
}

{
  "block": 29344205,
  "op": [
    "comment",
    {
      "author": "steemitboard",
      "body": "Congratulations @ricar27! You received a personal award!\n\n<table><tr><td>https://steemitimages.com/70x70/http://steemitboard.com/@ricar27/birthday1.png</td><td>1 Year on Steemit</td></tr></table>\n\n<sub>_[Click here to view your Board](https://steemitboard.com/@ricar27)_</sub>\n\n\n**Do not miss the last post from @steemitboard:**\n<table><tr><td><a href=\"https://steemit.com/steem/@steemitboard/steemwhales-has-officially-moved-to-steemitboard-ranking\"><img src=\"https://steemitimages.com/64x128/https://cdn.steemitimages.com/DQmfRVpHQhLDhnjDtqck8GPv9NPvNKPfMsDaAFDE1D9Er2Z/header_ranking.png\"></a></td><td><a href=\"https://steemit.com/steem/@steemitboard/steemwhales-has-officially-moved-to-steemitboard-ranking\">SteemWhales has officially moved to SteemitBoard Ranking</a></td></tr><tr><td><a href=\"https://steemit.com/steemitboard/@steemitboard/steemitboard-witness-update-2019-01-07\"><img src=\"https://steemitimages.com/64x128/http://i.cubeupload.com/7CiQEO.png\"></a></td><td><a href=\"https://steemit.com/steemitboard/@steemitboard/steemitboard-witness-update-2019-01-07\">SteemitBoard - Witness Update</a></td></tr></table>\n\n> Support [SteemitBoard's project](https://steemit.com/@steemitboard)! **[Vote for its witness](https://v2.steemconnect.com/sign/account-witness-vote?witness=steemitboard&approve=1)** and **get one more award**!",
      "json_metadata": "{\"image\":[\"https://steemitboard.com/img/notify.png\"]}",
      "parent_author": "ricar27",
      "parent_permlink": "jeep-liberty-2008-2012-window-regulator-replacement-tutorial",
      "permlink": "steemitboard-notify-ricar27-20190110t214509000z",
      "title": ""
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2019-01-10T21:45:09",
  "trx_id": "522acff44c1250b471ddabe26a5ef872c74d42be",
  "trx_in_block": 4,
  "virtual_op": 0
}

{
  "block": 22494287,
  "op": [
    "delegate_vesting_shares",
    {
      "delegatee": "ricar27",
      "delegator": "steem",
      "vesting_shares": "9150.064144 VESTS"
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2018-05-16T23:59:18",
  "trx_id": "77998484120a3f4242a42518abbbbbd88387be8e",
  "trx_in_block": 41,
  "virtual_op": 0
}

{
  "block": 18878259,
  "op": [
    "comment",
    {
      "author": "steem-network",
      "body": "<html>\n<p>Congratulations <a href=\"/@ricar27\" target=\"_blank\">@ricar27</a>, you have decided to take the next big step with your first post! The Steem Network Team wishes you a great time among this awesome community.</p>\n<hr>\n<div class=\"pull-left\"><img src=\"https://steemitimages.com/DQmaAdLUJ3yaSkmcmWECWyPGPWcjfbCoZ8Tu4RM6H4DbjCi/steem-network-thumbs-up.gif\" alt=\"Thumbs up for Steem Network´s strategy\" title=\"I suggest Steem Network´s strategy\" width=\"320\" height=\"222\"></div>\n<h1>The proven road to boost your personal success in this amazing Steem Network</h1>\n<p>Do you already know that awesome content will get great profits by following these <a href=\"/steem-network/@steem-network/spread-your-posts-through-this-proven-strategy-and-get-great-profits-in-return--for-posts-created-at-2018-01-10\" target=\"_blank\" alt=\"Steem Network\" title=\"Follow Steem Network´s suggestions to boost your success\">simple steps</a>, that have been worked out by experts?</p>\n</html>",
      "json_metadata": "{\"tags\": [\"steem-network\"], \"users\": [\"steem-network\", \"ricar27\"], \"image\": [\"https://steemitimages.com/DQmaAdLUJ3yaSkmcmWECWyPGPWcjfbCoZ8Tu4RM6H4DbjCi/steem-network-thumbs-up.gif\"], \"links\": [\"/@ricar27\", \"/steem-network/@steem-network/spread-your-posts-through-this-proven-strategy-and-get-great-profits-in-return--for-posts-created-at-2018-01-10\"], \"community\": \"steem-network\", \"app\": \"steem-network/1.0.1\", \"format\": \"html\"}",
      "parent_author": "ricar27",
      "parent_permlink": "jeep-liberty-2008-2012-window-regulator-replacement-tutorial",
      "permlink": "re-jeep-liberty-2008-2012-window-regulator-replacement-tutorial-20180111t073416",
      "title": ""
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2018-01-11T07:34:18",
  "trx_id": "fdfbfe40edb47249bdbd8759ec83a27e36320447",
  "trx_in_block": 41,
  "virtual_op": 0
}

{
  "block": 18864292,
  "op": [
    "vote",
    {
      "author": "ricar27",
      "permlink": "jeep-liberty-2008-2012-window-regulator-replacement-tutorial",
      "voter": "ubg",
      "weight": 100
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2018-01-10T19:55:48",
  "trx_id": "0c5e6cd752e9bbd4aa959156bda1be8e5d5841d4",
  "trx_in_block": 14,
  "virtual_op": 0
}

{
  "block": 18864011,
  "op": [
    "comment",
    {
      "author": "ricar27",
      "body": "Tools:\n\n•\t10mm Cup & Ratchet with extension\n•\tT25 Torx Screw Driver\n•\tT20 Torx Scree Driver\n•\tFlat Head Screw Driver\n•\tPhillips Head Screw Driver\n\nHello, \n\nIf you are like me and have search on how to replace the window regulator on a Jeep Liberty 2008 to 2012, you probably have not found anything. Most searches yield the previous Jeep Liberty model 2007 and back.\n\nNow, these mechanisms are clearly cheap and most window glass just fall thru your door because the whole window regulator fails. Motor don’t fail though.\n\nIt is important to make clear that the window regulators have different system between the front doors and the rear doors. \n\nFor the Front Door (DRIVERS SIDE):\nhttps://imgur.com/6sEliqX.png\n\n1)\tPry the cover of the chrome door handle, and use a 10MM cup to remove the panel screw.\n2)\tOn the bottom part of the panel there is a round cover, behind it is a Phillip Screw, remove it.\n https://imgur.com/ARQfprp.png\n\n3)\tPry upward the power window controls and after disconnecting the switch, with an upward force, lift the door panel, and remove it.\nhttps://imgur.com/IpE2sL8.png\n \n\n4)\tAfter the panel is removed. You will need to reconnect the power window controls, put the key in accessory and lower the window enough, until you see the white clip shown below, thru the hole in the assembly (marked red above).\nhttps://imgur.com/3EC1iEU.png\n\n5)\tUse a flat head screw driver to press that clip (you will need help from another person to lift the window glass up).  Pressing that clip will loosen the window glass for your helper to lift up. After is loose please be safe and fix the window with a screw driver, cardboard or shim so it does not goes down again.\n\n6)\tAfter you free the window glass proceed to:\na.\tRemove all 10MM bolts\nb.\tDisconnect the power window motor\nc.\tDisconnect the power window / power mirror control box\nd.\tDisconnect the power window controls\ne.\tRemove speaker and disconnect it.\nf.\tPry the brown plastic connector to the door handle to free it from the locking mechanism (you can use some plyers to do this), Picture below.\n https://imgur.com/qshMhCX.png\nhttps://imgur.com/VApw06q.png\n\n7)\tAfter all of the listed items in step 6 are disconnected or removed. Proceed to separate the window regulator assembly from the door itself. Now you will need to hold it away from the door and disconnect the power lock connection to the lock actuator (this is the last connector). \n\n8)\tOnce you disconnect the Lock Actuator plug, you can now remove the old window regulator assembly.\n\n9)\tYou will notice that the new assembly, only brings the new regulator and motor. This means you have to transfer to the new assembly the following:\na.\tTransfer the speaker\nb.\tTransfer the chrome handle, lift from below with a very fine screw driver or other pin, this will lose the pin that holds the handle to the door.\nc.\tDriver’s side has the power window and power mirror control box, remove it from the old assembly and install it in the new one (take a picture of where the plugs are connected that way you know where to put them back).\n https://imgur.com/Hv3rcwe.png\nd.\t***BEWARE*** the driver side window regulator that I bought had a different connector plug on the motor, so I had to remove the old motor and install it in the new window regulator assembly. (Its plug and play). Picture below.\nhttps://imgur.com/6mWDdD5.png\n \n\n10)\tOnce all the parts are transferred to the new Window Regulator assembly, reverse the disassembly process.\n\n*** Pro tip – make sure you present the new assembly to the door and make way to the metal rods for the door lock and the handle first, then connect the Door Lock actuator plug.  (Notice that you will have to make way of the entire electric wiring harness first)\n\n11)\tNow that you have the wiring harnessed run thru the new assembly, the lock rod and handle thru the gateway holes, and the lock actuator connected, the speaker mounted; proceed to present the new actuator on the door, and sample test various 10MM bolts to fix the panel.\n\n12)\tOnce the panel is fixed:\na.\tConnect the power window controls and lower the regulator mount to the level of the very same hole where the glass was loosened.\nb.\tLet your helper or companion loose the glass and lower it until you see it reach for the assembly, once there press the plastic clip with a flat head screw driver in order for the glass to clip in the assembly.\nc.\tOnce the glass is secure, proceed to complete all the installation of the bolts, and connectors\n\n13)\tReverse the disassembly process for the panel, and you should have a working power window.\n\n\n\n\n\n\nRear Driver Passenger Door:\n\n1)\tProceed to follow the door panel disassembly from the Driver’s door:\n https://imgur.com/QbSQaaw.png\n\n2)\tThis door will have the twitter speaker on the door handle cover\n https://imgur.com/VMAz5Nk.png\n\n3)\tIn order to complete the removal of this door window regulator you will have to note the following.\na.\tThe door lock actuator assembly will need to come out (white rectangle picture above, actuator is inside the door). \nb.\tIn order to completely remove the door lock actuator, you will need to use a 10MM socket to loosen the nut thru the hole marked by the white circle.\n\n4)\tMarked in red is the hole opening for you to lower the window and press the white retainer clip, as you same did with the driver’s door.\n\n*** PRO TIP – this door regulator assembly does NOT have railing, unlike the driver’s side; this means that after the window glass is removed you SHOULD NOT USE THE POWER WINDOW CONTROL TO MOVE UP THE WINDOW GLASS PLASTIC BRACKET!!! IF YOU DO THIS IT WILL FALL OFF!!!! \nhttps://imgur.com/5y0ULWX.png\n\nThe window glass ACTS as its own rail system!!! You have to connect the window glass while the white bracket is down (as it comes from the factory). I learnt this the hard way!!!.\nhttps://imgur.com/5y0ULWX.png\n\n5)\tTo remove the door lock actuator unscrew the follow in torx screw bolts.\n https://imgur.com/edloSWk.png\n\n6)\tPicture Below shows the door lock actuator assembly when it’s out.\n https://imgur.com/1qOXDtW.png\n\n7)\tOnce the Window is held up with a shim, and the old window regulator is out, proceed to do the following:\na.\tTransfer Speaker to the new window regulator assembly.\nb.\tTransfer the chrome door handle to the new window regulator assembly.\nc.\tInstall back the door lock actuator\nd.\tRun the wiring harness thru the new window regulator and connect the door handle and door lock hardware.\ne.\tConnect the door lock actuator wiring harness plug. (this will be a little uncomfortable).\nf.\tOnce the new window regulator assembly is in, proceed to lower the window glass. Somebody will need to push from above, while you press the white clip in the glass bracket on the new regulator, the same as you did on the drivers side.\n8)\tOnce the glass is clipped to the new assembly, connect the power window controls and test it. You want to make sure this is not derailed, so it functions properly.\n9)\tIf the window moves as it should and the power window works, proceed to complete all the installation reversing the disassembly process.\n\n\nZoom in on the bracket you have to press when removing the window glass:\n\n https://imgur.com/P2MnkpU.png\nRear\nhttps://imgur.com/arkkKO7.png\nFront",
      "json_metadata": "{\"tags\":[\"howto\",\"replace\",\"jeep\",\"windowregulator\"],\"image\":[\"https://imgur.com/6sEliqX.png\",\"https://imgur.com/ARQfprp.png\",\"https://imgur.com/IpE2sL8.png\",\"https://imgur.com/3EC1iEU.png\",\"https://imgur.com/qshMhCX.png\",\"https://imgur.com/VApw06q.png\",\"https://imgur.com/Hv3rcwe.png\",\"https://imgur.com/6mWDdD5.png\",\"https://imgur.com/QbSQaaw.png\",\"https://imgur.com/VMAz5Nk.png\",\"https://imgur.com/5y0ULWX.png\",\"https://imgur.com/edloSWk.png\",\"https://imgur.com/1qOXDtW.png\",\"https://imgur.com/P2MnkpU.png\",\"https://imgur.com/arkkKO7.png\"],\"app\":\"steemit/0.1\",\"format\":\"markdown\"}",
      "parent_author": "",
      "parent_permlink": "windowregulator",
      "permlink": "jeep-liberty-2008-2012-window-regulator-replacement-tutorial",
      "title": "Jeep Liberty 2008 – 2012 – Window Regulator Replacement Tutorial"
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2018-01-10T19:41:45",
  "trx_id": "284b0b5bd7dec6d2ad19506b6c42a0ad6e7d68f5",
  "trx_in_block": 48,
  "virtual_op": 0
}

{
  "block": 18863849,
  "op": [
    "vote",
    {
      "author": "ricar27",
      "permlink": "jeep-liberty-2008-2012-window-regulator-replacement-tutorial",
      "voter": "ricar27",
      "weight": 10000
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2018-01-10T19:33:39",
  "trx_id": "dd366f02aed0e27ead7bceffbe86841868431926",
  "trx_in_block": 40,
  "virtual_op": 0
}

{
  "block": 18863849,
  "op": [
    "comment",
    {
      "author": "ricar27",
      "body": "Tools:\n\n•\t10mm Cup & Ratchet with extension\n•\tT25 Torx Screw Driver\n•\tT20 Torx Scree Driver\n•\tFlat Head Screw Driver\n•\tPhillips Head Screw Driver\n\nHello, \n\nIf you are like me and have search on how to replace the window regulator on a Jeep Liberty 2008 to 2012, you probably have not found anything. Most searches yield the previous Jeep Liberty model 2007 and back.\n\nNow, these mechanisms are clearly cheap and most window glass just fall thru your door because the whole window regulator fails. Motor don’t fail though.\n\nIt is important to make clear that the window regulators have different system between the front doors and the rear doors. \n\nFor the Front Door (DRIVERS SIDE):\nhttps://imgur.com/6sEliqX.png\n\n1)\tPry the cover of the chrome door handle, and use a 10MM cup to remove the panel screw.\n2)\tOn the bottom part of the panel there is a round cover, behind it is a Phillip Screw, remove it.\n https://imgur.com/ARQfprp.png\n\n3)\tPry upward the power window controls and after disconnecting the switch, with an upward force, lift the door panel, and remove it.\nhttps://imgur.com/IpE2sL8.png\n \n\n4)\tAfter the panel is removed. You will need to reconnect the power window controls, put the key in accessory and lower the window enough, until you see the white clip shown below, thru the hole in the assembly (marked red above).\nhttps://imgur.com/3EC1iEU.png\n\n5)\tUse a flat head screw driver to press that clip (you will need help from another person to lift the window glass up).  Pressing that clip will loosen the window glass for your helper to lift up. After is loose please be safe and fix the window with a screw driver, cardboard or shim so it does not goes down again.\n\n6)\tAfter you free the window glass proceed to:\na.\tRemove all 10MM bolts\nb.\tDisconnect the power window motor\nc.\tDisconnect the power window / power mirror control box\nd.\tDisconnect the power window controls\ne.\tRemove speaker and disconnect it.\nf.\tPry the brown plastic connector to the door handle to free it from the locking mechanism (you can use some plyers to do this), Picture below.\n https://imgur.com/qshMhCX.png\nhttps://imgur.com/VApw06q.png\n\n7)\tAfter all of the listed items in step 6 are disconnected or removed. Proceed to separate the window regulator assembly from the door itself. Now you will need to hold it away from the door and disconnect the power lock connection to the lock actuator (this is the last connector). \n\n8)\tOnce you disconnect the Lock Actuator plug, you can now remove the old window regulator assembly.\n\n9)\tYou will notice that the new assembly, only brings the new regulator and motor. This means you have to transfer to the new assembly the following:\na.\tTransfer the speaker\nb.\tTransfer the chrome handle, lift from below with a very fine screw driver or other pin, this will lose the pin that holds the handle to the door.\nc.\tDriver’s side has the power window and power mirror control box, remove it from the old assembly and install it in the new one (take a picture of where the plugs are connected that way you know where to put them back).\n https://imgur.com/Hv3rcwe.png\nd.\t***BEWARE*** the driver side window regulator that I bought had a different connector plug on the motor, so I had to remove the old motor and install it in the new window regulator assembly. (Its plug and play). Picture below.\nhttps://imgur.com/6mWDdD5.png\n \n\n10)\tOnce all the parts are transferred to the new Window Regulator assembly, reverse the disassembly process.\n\n*** Pro tip – make sure you present the new assembly to the door and make way to the metal rods for the door lock and the handle first, then connect the Door Lock actuator plug.  (Notice that you will have to make way of the entire electric wiring harness first)\n\n11)\tNow that you have the wiring harnessed run thru the new assembly, the lock rod and handle thru the gateway holes, and the lock actuator connected, the speaker mounted; proceed to present the new actuator on the door, and sample test various 10MM bolts to fix the panel.\n\n12)\tOnce the panel is fixed:\na.\tConnect the power window controls and lower the regulator mount to the level of the very same hole where the glass was loosened.\nb.\tLet your helper or companion loose the glass and lower it until you see it reach for the assembly, once there press the plastic clip with a flat head screw driver in order for the glass to clip in the assembly.\nc.\tOnce the glass is secure, proceed to complete all the installation of the bolts, and connectors\n\n13)\tReverse the disassembly process for the panel, and you should have a working power window.\n\n\n\n\n\n\nRear Driver Passenger Door:\n\n1)\tProceed to follow the door panel disassembly from the Driver’s door:\n https://imgur.com/QbSQaaw.png\n\n2)\tThis door will have the twitter speaker on the door handle cover\n https://imgur.com/VMAz5Nk.png\n\n3)\tIn order to complete the removal of this door window regulator you will have to note the following.\na.\tThe door lock actuator assembly will need to come out (white rectangle picture above, actuator is inside the door). \nb.\tIn order to completely remove the door lock actuator, you will need to use a 10MM socket to loosen the nut thru the hole marked by the white circle.\n\n4)\tMarked in red is the hole opening for you to lower the window and press the white retainer clip, as you same did with the driver’s door.\n\n*** PRO TIP – this door regulator assembly does NOT have railing, unlike the driver’s side; this means that after the window glass is removed you SHOULD NOT USE THE POWER WINDOW CONTROL TO MOVE UP THE WINDOW GLASS PLASTIC BRACKET!!! IF YOU DO THIS IT WILL FALL OFF!!!! \nhttps://imgur.com/5y0ULWX.png\n\nThe window glass ACTS as its own rail system!!! You have to connect the window glass while the white bracket is down (as it comes from the factory). I learnt this the hard way!!!.\nhttps://imgur.com/5y0ULWX.png\n\n5)\tTo remove the door lock actuator unscrew the follow in torx screw bolts.\n https://imgur.com/edloSWk.png\n\n6)\tPicture Below shows the door lock actuator assembly when it’s out.\n https://imgur.com/1qOXDtW.png\n\n7)\tOnce the Window is held up with a shim, and the old window regulator is out, proceed to do the following:\na.\tTransfer Speaker to the new window regulator assembly.\nb.\tTransfer the chrome door handle to the new window regulator assembly.\nc.\tInstall back the door lock actuator\nd.\tRun the wiring harness thru the new window regulator and connect the door handle and door lock hardware.\ne.\tConnect the door lock actuator wiring harness plug. (this will be a little uncomfortable).\nf.\tOnce the new window regulator assembly is in, proceed to lower the window glass. Somebody will need to push from above, while you press the white clip in the glass bracket on the new regulator, the same as you did on the drivers side.\n8)\tOnce the glass is clipped to the new assembly, connect the power window controls and test it. You want to make sure this is not derailed, so it functions properly.\n9)\tIf the window moves as it should and the power window works, proceed to complete all the installation reversing the disassembly process.\n\n\nZoom in on the bracket you have to press when removing the window glass:\n\n https://imgur.com/P2MnkpU.png\nRear\nhttps://imgur.com/arkkKO7.png\nFront",
      "json_metadata": "{\"tags\":[\"windowregulator\",\"jeep\",\"liberty\",\"window\",\"regulator\"],\"image\":[\"https://imgur.com/6sEliqX.png\",\"https://imgur.com/ARQfprp.png\",\"https://imgur.com/IpE2sL8.png\",\"https://imgur.com/3EC1iEU.png\",\"https://imgur.com/qshMhCX.png\",\"https://imgur.com/VApw06q.png\",\"https://imgur.com/Hv3rcwe.png\",\"https://imgur.com/6mWDdD5.png\",\"https://imgur.com/QbSQaaw.png\",\"https://imgur.com/VMAz5Nk.png\",\"https://imgur.com/5y0ULWX.png\",\"https://imgur.com/edloSWk.png\",\"https://imgur.com/1qOXDtW.png\",\"https://imgur.com/P2MnkpU.png\",\"https://imgur.com/arkkKO7.png\"],\"app\":\"steemit/0.1\",\"format\":\"markdown\"}",
      "parent_author": "",
      "parent_permlink": "windowregulator",
      "permlink": "jeep-liberty-2008-2012-window-regulator-replacement-tutorial",
      "title": "Jeep Liberty 2008 – 2012 – Window Regulator Replacement Tutorial"
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2018-01-10T19:33:39",
  "trx_id": "dd366f02aed0e27ead7bceffbe86841868431926",
  "trx_in_block": 40,
  "virtual_op": 0
}

{
  "block": 18863303,
  "op": [
    "delegate_vesting_shares",
    {
      "delegatee": "ricar27",
      "delegator": "steem",
      "vesting_shares": "29698.799989 VESTS"
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2018-01-10T19:06:18",
  "trx_id": "7f749230c03b9460595f78953b21e05ac391f078",
  "trx_in_block": 32,
  "virtual_op": 0
}

{
  "block": 18862747,
  "op": [
    "account_create_with_delegation",
    {
      "active": {
        "account_auths": [],
        "key_auths": [
          [
            "STM88CJfYLn4CdwJbBdoVecj3nYbZBMzvFLK25m1wYCruim71kLdR",
            1
          ]
        ],
        "weight_threshold": 1
      },
      "creator": "steem",
      "delegation": "57000.000000 VESTS",
      "extensions": [],
      "fee": "0.500 STEEM",
      "json_metadata": "",
      "memo_key": "STM5JV4oxY7pkBjWcBaJTLCjiTGQEUGivq9f4bdhZvuCognVUwjoN",
      "new_account_name": "ricar27",
      "owner": {
        "account_auths": [],
        "key_auths": [
          [
            "STM7dziTVsHsEmnXYc4F1mNi7p8MYqRXVYdTbPwQEFLbBnPkDrzRV",
            1
          ]
        ],
        "weight_threshold": 1
      },
      "posting": {
        "account_auths": [],
        "key_auths": [
          [
            "STM6j9hLatfQUvAbr3un6bU5cXkYzSduNAQ7ABuh1V3YEfiqx5uS4",
            1
          ]
        ],
        "weight_threshold": 1
      }
    }
  ],
  "op_in_trx": 0,
  "timestamp": "2018-01-10T18:38:30",
  "trx_id": "ae0b2e9cc455479730ca6310d99dd2587424b11b",
  "trx_in_block": 12,
  "virtual_op": 0
}