{
  "trx_id": "c92c987b318adabfe36933ad606f67a26b61623b",
  "block": 72768060,
  "trx_in_block": 37,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2023-03-11T02:17:06",
  "op": [
    "transfer",
    {
      "from": "steemegg",
      "to": "r1979",
      "amount": "0.001 STEEM",
      "memo": "Vote se-witness as one of your 30 witnesses for free votes https://steemlogin.com/sign/account-witness-vote?witness=se-witness&approve=1 |  Send 15 or more TRON to TUep3qrvP4QwqHtoXJjdQ6Q7JRQdyuaJQH with your steem username as the memo for the market value back in steem.  Or visit steemegg.com and visit the exchange tab."
    }
  ]
}

{
  "trx_id": "da63d88ea84e1ee78bc2da89fefe68da612961f5",
  "block": 70579409,
  "trx_in_block": 5,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2022-12-24T17:35:15",
  "op": [
    "transfer",
    {
      "from": "steemegg",
      "to": "r1979",
      "amount": "0.001 STEEM",
      "memo": "Free Upvotes Await!!!, Vote @se-witness for one of your 30 witness votes. Once you do so, you will start accumulating free upvotes every 6 hours automatically.  Please check my latests posts for more info.  Thanks!"
    }
  ]
}

{
  "trx_id": "20bf1baf0e9e37f8f7cc7c14df4a7f155217369c",
  "block": 68345524,
  "trx_in_block": 5,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2022-10-07T16:49:00",
  "op": [
    "transfer",
    {
      "from": "roadofrich",
      "to": "r1979",
      "amount": "0.005 STEEM",
      "memo": "❗Hello r1979, You can contribute to the @roadofrich by voting as a witness. You will receive daily STEEM revenue through Witness vote. Enjoy your day 🙃"
    }
  ]
}

{
  "trx_id": "42bd3b5d9c171a265559c62cf7fae394b3edf865",
  "block": 68086978,
  "trx_in_block": 1,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2022-09-28T16:20:48",
  "op": [
    "transfer",
    {
      "from": "roadofrich",
      "to": "r1979",
      "amount": "0.005 STEEM",
      "memo": "❗Hello r1979, You can contribute to the @roadofrich by voting as a witness. You will receive daily STEEM revenue through Witness vote. Enjoy your day 🙃"
    }
  ]
}

{
  "trx_id": "0d748fadfee398793d06b75ae9e2165fbf80b9cd",
  "block": 68058232,
  "trx_in_block": 7,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2022-09-27T16:15:51",
  "op": [
    "transfer",
    {
      "from": "roadofrich",
      "to": "r1979",
      "amount": "0.005 STEEM",
      "memo": "❗Hello r1979, You can contribute to the @roadofrich by voting as a witness. You will receive daily STEEM revenue through Witness vote. Enjoy your day 🙃"
    }
  ]
}

{
  "trx_id": "3777d9efc3cbb41cd253994345a8c6dfb0f8f5fb",
  "block": 68029576,
  "trx_in_block": 2,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2022-09-26T16:15:18",
  "op": [
    "transfer",
    {
      "from": "roadofrich",
      "to": "r1979",
      "amount": "0.005 STEEM",
      "memo": "❗Hello r1979, You can contribute to the @roadofrich by voting as a witness. You will receive daily STEEM revenue through Witness vote. Enjoy your day 🙃"
    }
  ]
}

{
  "trx_id": "a51ae059db2e1fc3108b1253ec7ba55726f18bcd",
  "block": 67800645,
  "trx_in_block": 4,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2022-09-18T16:14:18",
  "op": [
    "transfer",
    {
      "from": "roadofrich",
      "to": "r1979",
      "amount": "0.005 STEEM",
      "memo": "❗Hello r1979, You can contribute to the @roadofrich by voting as a witness. You will receive daily STEEM revenue through Witness vote. Enjoy your day 🙃"
    }
  ]
}

{
  "trx_id": "d6ad2e5ef5dd87712c70767db92063be9bdfa65c",
  "block": 67771985,
  "trx_in_block": 1,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2022-09-17T16:14:24",
  "op": [
    "transfer",
    {
      "from": "roadofrich",
      "to": "r1979",
      "amount": "0.005 STEEM",
      "memo": "❗Hello r1979, You can contribute to the @roadofrich by voting as a witness. You will receive daily STEEM revenue through Witness vote. Enjoy your day 🙃"
    }
  ]
}

{
  "trx_id": "e45126cfe931d14a680b7ad5f3ac8a0c81dccefd",
  "block": 67368569,
  "trx_in_block": 7,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2022-09-03T14:12:15",
  "op": [
    "transfer",
    {
      "from": "roadofrich",
      "to": "r1979",
      "amount": "0.050 STEEM",
      "memo": "❗Hello r1979, You can contribute to the @roadofrich by voting as a witness. 🪙 Vote to share for Daily Witness vote and more 🪙 . ❗ Enjoy your day 🙃"
    }
  ]
}

{
  "trx_id": "0000000000000000000000000000000000000000",
  "block": 60576572,
  "trx_in_block": 4294967295,
  "op_in_trx": 0,
  "virtual_op": 2,
  "timestamp": "2022-01-09T07:52:15",
  "op": [
    "fill_transfer_from_savings",
    {
      "from": "r1979",
      "to": "r1979",
      "amount": "2.043 SBD",
      "request_id": 1641455532,
      "memo": ""
    }
  ]
}

{
  "trx_id": "71d5d1d1fbd300da7b5f9702c868b6057126fe91",
  "block": 60490733,
  "trx_in_block": 6,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2022-01-06T07:52:15",
  "op": [
    "transfer_from_savings",
    {
      "from": "r1979",
      "request_id": 1641455532,
      "to": "r1979",
      "amount": "2.043 SBD",
      "memo": ""
    }
  ]
}

{
  "trx_id": "c7d6a02dfb248146168c1c352660e8621a05ac31",
  "block": 59762746,
  "trx_in_block": 41,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2021-12-11T17:26:30",
  "op": [
    "transfer_to_vesting",
    {
      "from": "r1979",
      "to": "r1979",
      "amount": "0.001 STEEM"
    }
  ]
}

{
  "trx_id": "e5fcb30172a6d8d097b7694356e9c58580b7f36b",
  "block": 48713906,
  "trx_in_block": 6,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2020-11-18T19:10:39",
  "op": [
    "custom_json",
    {
      "required_auths": [],
      "required_posting_auths": [
        "r1979"
      ],
      "id": "community",
      "json": "[\"subscribe\",{\"community\":\"hive-148497\"}]"
    }
  ]
}

{
  "trx_id": "976e9916842863ad2a9c7786ad02afed33238639",
  "block": 31516046,
  "trx_in_block": 19,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2019-03-27T09:04:57",
  "op": [
    "vote",
    {
      "voter": "r1979",
      "author": "r1979",
      "permlink": "simplicity-remote-node-setup-guide",
      "weight": 0
    }
  ]
}

{
  "trx_id": "e06b28359e9cd3485d543522d19ff35309bd3c68",
  "block": 31516044,
  "trx_in_block": 45,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2019-03-27T09:04:51",
  "op": [
    "vote",
    {
      "voter": "r1979",
      "author": "r1979",
      "permlink": "simplicity-remote-node-setup-guide",
      "weight": 0
    }
  ]
}

{
  "trx_id": "06ed68a8e5402ac8c47aed035b918b1fb5ccc46a",
  "block": 31516034,
  "trx_in_block": 9,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2019-03-27T09:04:21",
  "op": [
    "custom_json",
    {
      "required_auths": [],
      "required_posting_auths": [
        "r1979"
      ],
      "id": "follow",
      "json": "[\"follow\",{\"follower\":\"r1979\",\"following\":\"tensor\",\"what\":[\"blog\"]}]"
    }
  ]
}

{
  "trx_id": "137150617292eab6d17d390e297659bffb612c47",
  "block": 31516032,
  "trx_in_block": 10,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2019-03-27T09:04:15",
  "op": [
    "custom_json",
    {
      "required_auths": [],
      "required_posting_auths": [
        "r1979"
      ],
      "id": "follow",
      "json": "[\"follow\",{\"follower\":\"r1979\",\"following\":\"tensor\",\"what\":[\"blog\"]}]"
    }
  ]
}

{
  "trx_id": "897b8c1132a99a8b927c90b7fe91eb14e6961fef",
  "block": 31361333,
  "trx_in_block": 14,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2019-03-22T00:05:09",
  "op": [
    "comment",
    {
      "parent_author": "r1979",
      "parent_permlink": "simplicity-remote-node-setup-guide",
      "author": "steemitboard",
      "permlink": "steemitboard-notify-r1979-20190322t000509000z",
      "title": "",
      "body": "Congratulations @r1979! You received a personal award!\n\n<table><tr><td>https://steemitimages.com/70x70/http://steemitboard.com/@r1979/birthday2.png</td><td>Happy Birthday! - You are on the Steem blockchain for 2 years!</td></tr></table>\n\n<sub>_You can view [your badges on your Steem Board](https://steemitboard.com/@r1979) and compare to others on the [Steem Ranking](http://steemitboard.com/ranking/index.php?name=r1979)_</sub>\n\n\n**Do not miss the last post from @steemitboard:**\n<table><tr><td><a href=\"https://steemit.com/carnival/@steemitboard/carnival-challenge-here-are-the-winners\"><img src=\"https://steemitimages.com/64x128/http://i.cubeupload.com/rltzHT.png\"></a></td><td><a href=\"https://steemit.com/carnival/@steemitboard/carnival-challenge-here-are-the-winners\">Carnival Challenge - Here are the winners</a></td></tr></table>\n\n###### [Vote for @Steemitboard as a witness](https://v2.steemconnect.com/sign/account-witness-vote?witness=steemitboard&approve=1) to get one more award and increased upvotes!",
      "json_metadata": "{\"image\":[\"https://steemitboard.com/img/notify.png\"]}"
    }
  ]
}

{
  "trx_id": "28cec89c4c98394002762601d7616c0dfce9c63e",
  "block": 31193345,
  "trx_in_block": 19,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2019-03-16T04:00:45",
  "op": [
    "transfer",
    {
      "from": "dlease",
      "to": "r1979",
      "amount": "0.001 STEEM",
      "memo": "BuildTeam is proud to announce the release of DLease.io - our flagship P2P leasing marketplace app, aimed at assisting Steemians in leasing and delegating STEEM POWER for daily passive returns, with recent yields as high as 20% APR. DLease.io is a professional grade app , designed to replace the current MinnowBooster.net leasing market which has to date facilitated nearly 20 Million STEEM POWER in lease value to happy BuildTeam customers. View the new app at https://dlease.io/ or read the announcement post on https://steemit.com/@dlease."
    }
  ]
}

{
  "trx_id": "1f7eefc9f2d4c09fc56e8617f1f0890537dd2727",
  "block": 28248250,
  "trx_in_block": 35,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-12-03T19:49:18",
  "op": [
    "account_update",
    {
      "account": "r1979",
      "posting": {
        "weight_threshold": 1,
        "account_auths": [
          [
            "partiko-steemcon",
            1
          ]
        ],
        "key_auths": [
          [
            "STM5gcAN5AMkAFBXakYDg25CEEjDExbSZuYARjXDGBiswmTybCRnc",
            1
          ]
        ]
      },
      "memo_key": "STM55Geuv2MzKbN4Yervq9KZhtu9GHgmqoQrQXCTSQb43D217R98J",
      "json_metadata": "{\"profile\":{\"name\":\"r1979\",\"profile_image\":\"https://upload.wikimedia.org/wikipedia/en/5/55/Escher_Circle_Limit_III.jpg\",\"website\":\"https://21.co/r1979/\"}}"
    }
  ]
}

{
  "trx_id": "310d5dfc8ada1d62e18b077eaf0dda928c94b297",
  "block": 26856812,
  "trx_in_block": 28,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-10-16T11:33:09",
  "op": [
    "claim_reward_balance",
    {
      "account": "r1979",
      "reward_steem": "0.000 STEEM",
      "reward_sbd": "0.000 SBD",
      "reward_vests": "36.436867 VESTS"
    }
  ]
}

{
  "trx_id": "040e36ce8a4e9a408f2676d61c260113583457f6",
  "block": 26856807,
  "trx_in_block": 13,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-10-16T11:32:54",
  "op": [
    "vote",
    {
      "voter": "r1979",
      "author": "zcoinofficial",
      "permlink": "an-overview-of-blockchain-privacy-mechanisms-and-how-zerocoin-in-zcoin-usdxzc-not-zcash-stacks-up",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "0000000000000000000000000000000000000000",
  "block": 25330078,
  "trx_in_block": 4294967295,
  "op_in_trx": 0,
  "virtual_op": 17,
  "timestamp": "2018-08-23T21:22:33",
  "op": [
    "curation_reward",
    {
      "curator": "r1979",
      "reward": "36.436867 VESTS",
      "comment_author": "heiditravels",
      "comment_permlink": "crypto-tips-unplugged-do-you-realize-what-we-are-witnessing"
    }
  ]
}

{
  "trx_id": "363ebc91580d84d1982a6f6d1659ff6fbb9d95a3",
  "block": 25143038,
  "trx_in_block": 8,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-08-17T09:27:12",
  "op": [
    "vote",
    {
      "voter": "r1979",
      "author": "heiditravels",
      "permlink": "crypto-tips-unplugged-do-you-realize-what-we-are-witnessing",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "861e5903c72f7cb325cdf8fcebe873483f5a2c2b",
  "block": 23652582,
  "trx_in_block": 30,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-06-26T06:15:27",
  "op": [
    "transfer_to_savings",
    {
      "from": "r1979",
      "to": "r1979",
      "amount": "0.129 SBD",
      "memo": ""
    }
  ]
}

{
  "trx_id": "83a7da89ea90f25e5084b986d22ff29defe8f524",
  "block": 23652576,
  "trx_in_block": 18,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-06-26T06:15:09",
  "op": [
    "transfer_to_vesting",
    {
      "from": "r1979",
      "to": "r1979",
      "amount": "0.002 STEEM"
    }
  ]
}

{
  "trx_id": "6a7cd571ca42d626d00c72278471bbb6c58f73ae",
  "block": 23652570,
  "trx_in_block": 47,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-06-26T06:14:51",
  "op": [
    "claim_reward_balance",
    {
      "account": "r1979",
      "reward_steem": "0.000 STEEM",
      "reward_sbd": "0.126 SBD",
      "reward_vests": "116.358031 VESTS"
    }
  ]
}

{
  "trx_id": "b28616bb52cc53dc7795ddc0e1ffc519909d8f51",
  "block": 21638735,
  "trx_in_block": 31,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-04-17T06:21:27",
  "op": [
    "comment",
    {
      "parent_author": "r1979",
      "parent_permlink": "simplicity-remote-node-setup-guide",
      "author": "stanley888",
      "permlink": "re-r1979-simplicity-remote-node-setup-guide-20180417t062117904z",
      "title": "",
      "body": "v1.2 If you run into a build error with something about a support folder\n```\nsupport/cleanse.cpp:13:1: fatal error: opening dependency file obj/support/cleanse.d: No such file or directory\n```\n\njust run \" mkdir -p obj/support \" in the src folder",
      "json_metadata": "{\"tags\":[\"simplicity\"],\"app\":\"steemit/0.1\"}"
    }
  ]
}

{
  "trx_id": "2d5bc12bb11fdb9c6d6071b560caad1b47a7740c",
  "block": 21483623,
  "trx_in_block": 10,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-04-11T21:04:12",
  "op": [
    "transfer",
    {
      "from": "justyy",
      "to": "r1979",
      "amount": "0.001 STEEM",
      "memo": "Hello @r1979, I am a new witness with Reputation 70+, my witness thread: https://steemit.com/witness-category/@justyy/justyy-just-another-witness    Thank you very much for your considerations. ^_^  My contributions: SteemIt Tools, Bots, APIs and Tutorial: https://helloacm.com/tools/steemit/"
    }
  ]
}

{
  "trx_id": "aa6ceafb715ca8bba57b40ba5109c84716dde93f",
  "block": 21384115,
  "trx_in_block": 63,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-04-08T10:08:21",
  "op": [
    "comment",
    {
      "parent_author": "r1979",
      "parent_permlink": "simplicity-remote-node-setup-guide",
      "author": "stanley888",
      "permlink": "re-r1979-simplicity-remote-node-setup-guide-20180408t100623958z",
      "title": "",
      "body": "@@ -43,16 +43,20 @@\n th this%0A\n+%60%60%60%0A\n git clon\n@@ -106,16 +106,20 @@\n ity.git%0A\n+%60%60%60%0A\n upvote m\n",
      "json_metadata": "{\"tags\":[\"simplicity\"],\"app\":\"steemit/0.1\"}"
    }
  ]
}

{
  "trx_id": "160e9b3f0d7fc713613083b914933d9c6e4d0351",
  "block": 21384083,
  "trx_in_block": 35,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-04-08T10:06:45",
  "op": [
    "vote",
    {
      "voter": "stanley888",
      "author": "r1979",
      "permlink": "simplicity-remote-node-setup-guide",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "6d0edfb2b9501b83fb0604d5b594427f02177490",
  "block": 21384077,
  "trx_in_block": 45,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-04-08T10:06:27",
  "op": [
    "comment",
    {
      "parent_author": "r1979",
      "parent_permlink": "simplicity-remote-node-setup-guide",
      "author": "stanley888",
      "permlink": "re-r1979-simplicity-remote-node-setup-guide-20180408t100623958z",
      "title": "",
      "body": "To get version v.1.1.2.0 wallet replace with this\ngit clone https://github.com/ComputerCraftr/Simplicity.git\nupvote my post if helped you",
      "json_metadata": "{\"tags\":[\"simplicity\"],\"links\":[\"https://github.com/ComputerCraftr/Simplicity.git\"],\"app\":\"steemit/0.1\"}"
    }
  ]
}

{
  "trx_id": "26d125b5cf8e3359e447a3b0fbe768a4aa7f6172",
  "block": 21250128,
  "trx_in_block": 46,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-04-03T18:28:15",
  "op": [
    "vote",
    {
      "voter": "words-of-wisdom",
      "author": "r1979",
      "permlink": "simplicity-remote-node-setup-guide",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "3c8a6593565cce622216a6996b19aed8503fb397",
  "block": 21250124,
  "trx_in_block": 39,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-04-03T18:28:03",
  "op": [
    "comment",
    {
      "parent_author": "r1979",
      "parent_permlink": "simplicity-remote-node-setup-guide",
      "author": "words-of-wisdom",
      "permlink": "re-r1979-simplicity-remote-node-setup-guide-20180403t182800698z",
      "title": "",
      "body": "autogen.sh not permitted. Is there a work around?",
      "json_metadata": "{\"tags\":[\"simplicity\"],\"app\":\"steemit/0.1\"}"
    }
  ]
}

{
  "trx_id": "b9d79bfa166c2c0a9977d186f93b37ebd85e0abc",
  "block": 21063102,
  "trx_in_block": 12,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-03-28T06:34:12",
  "op": [
    "transfer",
    {
      "from": "emrebeyler",
      "to": "r1979",
      "amount": "0.001 SBD",
      "memo": "Hi, I am a new witness and you have free slots for your witness votes. Consider voting for me. My thread: https://steemit.com/witness-category/@emrebeyler/announcing-myself-as-a-new-witness-emrebeyler"
    }
  ]
}

{
  "trx_id": "0000000000000000000000000000000000000000",
  "block": 20729613,
  "trx_in_block": 4294967295,
  "op_in_trx": 0,
  "virtual_op": 20,
  "timestamp": "2018-03-16T15:55:21",
  "op": [
    "author_reward",
    {
      "author": "r1979",
      "permlink": "simplicity-remote-node-setup-guide",
      "sbd_payout": "0.126 SBD",
      "steem_payout": "0.000 STEEM",
      "vesting_payout": "116.358031 VESTS"
    }
  ]
}

{
  "trx_id": "1c59a2732ffa0f22647873e75d060ede91744678",
  "block": 20712017,
  "trx_in_block": 8,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-03-16T01:15:06",
  "op": [
    "vote",
    {
      "voter": "arnoz",
      "author": "r1979",
      "permlink": "simplicity-remote-node-setup-guide",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "8d02584fd2c75db841c52a7ffaece7dd443e5a56",
  "block": 20658240,
  "trx_in_block": 48,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-03-14T04:21:06",
  "op": [
    "transfer",
    {
      "from": "steempromos",
      "to": "r1979",
      "amount": "0.001 SBD",
      "memo": "LAST CHANCE: SuperWhale Subscription: Send from 1 to 10 SBD or STEEM to @steempromos to subscribe to SuperWhale service which gives out 700% to 850% returns! Only 219 spots left. (TIER 1 = 1 - 3 SBD OR STEEM, TIER 2 = 4 - 9 SBD OR STEEM, TIER 3 = 10 or more SBD / STEEM) - Upvotes are done from our Whale accounts."
    }
  ]
}

{
  "trx_id": "4bd1a7042615b22a96f2b3df3f6af6b20b2792d8",
  "block": 20613974,
  "trx_in_block": 44,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-03-12T15:26:48",
  "op": [
    "vote",
    {
      "voter": "r1979",
      "author": "r1979",
      "permlink": "simplicity-remote-node-setup-guide",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "5a705f47a45be8e2d1c99dcec1c7b799488c45b3",
  "block": 20613968,
  "trx_in_block": 61,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-03-12T15:26:30",
  "op": [
    "vote",
    {
      "voter": "r1979",
      "author": "r1979",
      "permlink": "simplicity-remote-node-setup-guide",
      "weight": 0
    }
  ]
}

{
  "trx_id": "4e7c09140c39df6d282d78066874d7db6a7a629a",
  "block": 20589283,
  "trx_in_block": 0,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-03-11T18:50:27",
  "op": [
    "comment",
    {
      "parent_author": "",
      "parent_permlink": "simplicity",
      "author": "r1979",
      "permlink": "simplicity-remote-node-setup-guide",
      "title": "Simplicity Remote Node Setup Guide",
      "body": "@@ -14732,41 +14732,41 @@\n L: 8\n-U8u33ZBFEySBoLCBC4Rsh2ZmGHkjSUC1d\n+RdSckNG5DzBrV12uyF2x9PrhXMDhVGbaz\n %0A%0A--\n",
      "json_metadata": "{\"tags\":[\"simplicity\",\"masternodes\",\"cryptocurrencies\",\"tutorial\"],\"app\":\"steemit/0.1\",\"format\":\"markdown\",\"image\":[\"https://steemitimages.com/DQmPjT32oLA2nkMUZMqRhiug9PHjoFffyDWFLBStrfzYqSc/Screenshot%20from%202018-03-09%2016-10-14.png\",\"https://steemitimages.com/DQmdYRRyzF9fYx4XEXpto7Qy5iGXnL6GpgfcC3fyDybKhhN/Screenshot%20from%202018-03-09%2016-07-06.png\"]}"
    }
  ]
}

{
  "trx_id": "dffce788d4d8a7102d2e0d1657568e08b4be360e",
  "block": 20588793,
  "trx_in_block": 62,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-03-11T18:25:54",
  "op": [
    "comment",
    {
      "parent_author": "",
      "parent_permlink": "simplicity",
      "author": "r1979",
      "permlink": "simplicity-remote-node-setup-guide",
      "title": "Simplicity Remote Node Setup Guide",
      "body": "@@ -14710,16 +14710,27 @@\n -%0A%0A#####\n+ Tip jar ;)\n  SPL: 8U\n",
      "json_metadata": "{\"tags\":[\"simplicity\",\"masternodes\",\"cryptocurrencies\",\"tutorial\"],\"app\":\"steemit/0.1\",\"format\":\"markdown\",\"image\":[\"https://steemitimages.com/DQmPjT32oLA2nkMUZMqRhiug9PHjoFffyDWFLBStrfzYqSc/Screenshot%20from%202018-03-09%2016-10-14.png\",\"https://steemitimages.com/DQmdYRRyzF9fYx4XEXpto7Qy5iGXnL6GpgfcC3fyDybKhhN/Screenshot%20from%202018-03-09%2016-07-06.png\"]}"
    }
  ]
}

{
  "trx_id": "2f6df255ad0f96055b1832d51cd34157b2d6cf0d",
  "block": 20588782,
  "trx_in_block": 36,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-03-11T18:25:21",
  "op": [
    "comment",
    {
      "parent_author": "",
      "parent_permlink": "simplicity",
      "author": "r1979",
      "permlink": "simplicity-remote-node-setup-guide",
      "title": "Simplicity Remote Node Setup Guide",
      "body": "@@ -14689,16 +14689,75 @@\n rt-many command.\n+%0A%0A----%0A%0A##### SPL: 8U8u33ZBFEySBoLCBC4Rsh2ZmGHkjSUC1d%0A%0A----\n",
      "json_metadata": "{\"tags\":[\"simplicity\",\"masternodes\",\"cryptocurrencies\",\"tutorial\"],\"app\":\"steemit/0.1\",\"format\":\"markdown\",\"image\":[\"https://steemitimages.com/DQmPjT32oLA2nkMUZMqRhiug9PHjoFffyDWFLBStrfzYqSc/Screenshot%20from%202018-03-09%2016-10-14.png\",\"https://steemitimages.com/DQmdYRRyzF9fYx4XEXpto7Qy5iGXnL6GpgfcC3fyDybKhhN/Screenshot%20from%202018-03-09%2016-07-06.png\"]}"
    }
  ]
}

{
  "trx_id": "55d8a6b477b134aa7665133b4b22656271a36ad6",
  "block": 20575706,
  "trx_in_block": 97,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-03-11T07:30:27",
  "op": [
    "transfer",
    {
      "from": "steempromos",
      "to": "r1979",
      "amount": "0.001 SBD",
      "memo": "Send from 1 to 10 SBD or STEEM to @steempromos to subscribe to 🐋SuperWhale🐋 service which gives out 700% to 850% returns! Spots are limited so act fast! (TIER 1 = 1 - 3 SBD OR STEEM, TIER 2 = 4 - 9 SBD OR STEEM, TIER 3 = 10 or more SBD / STEEM)"
    }
  ]
}

{
  "trx_id": "93c3c47e59d37036fce85de0baefdba164b98c14",
  "block": 20535140,
  "trx_in_block": 28,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-03-09T21:36:21",
  "op": [
    "vote",
    {
      "voter": "r1979",
      "author": "r1979",
      "permlink": "simplicity-remote-node-setup-guide",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "9caf292bf18f9634421905a1ce846d2edba7431d",
  "block": 20530746,
  "trx_in_block": 5,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-03-09T17:56:33",
  "op": [
    "vote",
    {
      "voter": "sensation",
      "author": "r1979",
      "permlink": "simplicity-remote-node-setup-guide",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "d15942499cf81392c2e77a905c827f6b4fe4cf9b",
  "block": 20528414,
  "trx_in_block": 17,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-03-09T15:59:51",
  "op": [
    "comment",
    {
      "parent_author": "",
      "parent_permlink": "simplicity",
      "author": "r1979",
      "permlink": "simplicity-remote-node-setup-guide",
      "title": "Simplicity Remote Node Setup Guide",
      "body": "@@ -3275,16 +3275,181 @@\n it(s).%0A%0A\n+!%5BScreenshot from 2018-03-09 16-07-06.png%5D(https://steemitimages.com/DQmdYRRyzF9fYx4XEXpto7Qy5iGXnL6GpgfcC3fyDybKhhN/Screenshot%2520from%25202018-03-09%252016-07-06.png)%0A%0A\n Once you\n",
      "json_metadata": "{\"tags\":[\"simplicity\",\"masternodes\",\"cryptocurrencies\",\"tutorial\"],\"app\":\"steemit/0.1\",\"format\":\"markdown\",\"image\":[\"https://steemitimages.com/DQmPjT32oLA2nkMUZMqRhiug9PHjoFffyDWFLBStrfzYqSc/Screenshot%20from%202018-03-09%2016-10-14.png\",\"https://steemitimages.com/DQmdYRRyzF9fYx4XEXpto7Qy5iGXnL6GpgfcC3fyDybKhhN/Screenshot%20from%202018-03-09%2016-07-06.png\"]}"
    }
  ]
}

{
  "trx_id": "fe01c71f731e7d70e592732a5e3af7780da623b6",
  "block": 20528389,
  "trx_in_block": 40,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-03-09T15:58:36",
  "op": [
    "comment",
    {
      "parent_author": "",
      "parent_permlink": "simplicity",
      "author": "r1979",
      "permlink": "simplicity-remote-node-setup-guide",
      "title": "Simplicity Remote Node Setup Guide",
      "body": "@@ -1927,16 +1927,181 @@\n %0Aetc..%0A%0A\n+!%5BScreenshot from 2018-03-09 16-10-14.png%5D(https://steemitimages.com/DQmPjT32oLA2nkMUZMqRhiug9PHjoFffyDWFLBStrfzYqSc/Screenshot%2520from%25202018-03-09%252016-10-14.png)%0A%0A\n Send **E\n",
      "json_metadata": "{\"tags\":[\"simplicity\",\"masternodes\",\"cryptocurrencies\",\"tutorial\"],\"app\":\"steemit/0.1\",\"format\":\"markdown\",\"image\":[\"https://steemitimages.com/DQmPjT32oLA2nkMUZMqRhiug9PHjoFffyDWFLBStrfzYqSc/Screenshot%20from%202018-03-09%2016-10-14.png\"]}"
    }
  ]
}

{
  "trx_id": "871b10dedd595ab0138b7e30fc9a5bdc284b5b75",
  "block": 20528324,
  "trx_in_block": 15,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-03-09T15:55:21",
  "op": [
    "comment",
    {
      "parent_author": "",
      "parent_permlink": "simplicity",
      "author": "r1979",
      "permlink": "simplicity-remote-node-setup-guide",
      "title": "Simplicity Remote Node Setup Guide",
      "body": "*DISCLAIMER: This guide assumes a basic knowledge of Linux and command line interface. We are not responsible for any loss for using this guide without the pre-requisite knowledge. Do not proceed with this guide if you have any doubts.*\n\n## Getting Started\nEnsure you have the latest Simplicity wallet and you have already obtained your 200000 SPL (preferably just a bit more to cover fees when you are transferring around).\n\n### Step 1: Encrypt and Backup your wallet\nIf you have not done so already, make sure you encrypt your SPL wallet!\n\nGo to Settings -> Encrypt Wallet.\n\nAfter you have encrypted it, it is also recommended to do turn the wallet off and make a backup of the `wallet.dat` file. Store this backup `wallet.dat` on a separate physical drive or pen drive. The `wallet.dat` file is encrypted so even if the `wallet.dat` is exposed, if your password is secure enough (tip: use a random password generator!), it will be secure.\n\nPlease do not forget your `wallet.dat` password! There is no coming back from losing the password. \n\n### Step 2: Generate a masternode key and deposit address for the 200000 SPL collateral\nThe masternode key we create in this step is used to start/stop your masternode. Even if a third party gets in possession of this key he/she cannot steal your coins.\n\nYour deposit address is where you will be depositing your 200000 SPL.\n\nClick on Help -> Debug Window -> Console and enter in the following commands.\n\n`masternode genkey`\n\nThis generates the masternode key. Copy it into a txt file.\n\n`getaccountaddress SPL1`\n\nThis generates the deposit address for the collateral and labels it \"SPL1\". Copy the address into the same txt file where you copied the masternode key. If you have multiple masternodes, you can also create additional addresses and unique masternode keys for each one of them.\n\n`masternode genkey`\n`getaccountaddress SPL2`\n\n`masternode genkey`\n`getaccountaddress SPL3`\n\netc..\n\nSend **EXACTLY 200000 SPL** into the deposit address just created in **ONE SINGLE TRANSACTION**. That means, do not send 500 and then another 500! It has to be in **ONE SINGLE TRANSACTION**! Also, do not tick subtract fee from amount!\n\nIt is not recommended to send it direct from an exchange as they might deduct certain withdrawal fees resulting in less than 200000 SPL in that transfer. First transfer the SPL from the exchange to your wallet and then send the 200000 SPL to yourself in **EXACTLY ONE SINGLE TRANSACTION**.\n\nIn the meantime, while we now wait for the transaction to confirm and be valid as your masternode deposit, we can proceed with the other steps.\n\nA special note only for those who are creating more than one masternode: special care is required to ensure that you are creating deposits properly, as you do not want to break the previous 200000 SPL deposit you just made by taking by mistake funds from that deposit.\n\nTo do this, turn on the coin control settings by going to Settings -> Options -> Display and click on \"Display coin control\". This will enable fine grained control of which outputs you are using when making your next 200000 SPL deposit(s).\n\nOnce you activated the coin control features, go to the Send tab and click on the \"Inputs\" button. You should see your 200000 SPL deposit there. Make sure you lock it before sending out a new transaction of 200000 SPL.\n\nOnce you have done this, you can make the next 200000 SPL deposit for your next masternode. Repeat this everytime you have made a new masternode.\n\nYou can always verify you are doing this correctly by going into Help -> Debug Window -> Console and typing `masternode outputs` which would display all masternode capable deposits.\n\n### Step 3: Create a local masternode.conf file\nWe now need to find out the transaction ID and Index of your masternode deposit. To do this, go to Help -> Debug Window -> Console and type:\n\n`masternode outputs`\n\nYou will receive an output that looks something like this:\n\n`{ \"d6fd38868bb8f9958e34d5155437d009b72dfd33fc28874c87fd42e51c0f74fdb\" : \"0\", }`\n\nThe first portion is your transaction ID and the second number (typically 0 or 1) is the Index.\n\nNow create a `masternode.conf` file in your Simplicity data directory.\n\nOn Windows this is located at `%appdata%/simplicity` (type this in Windows Explorer) unless you have changed the install directory. In Mac, this is in your `$HOME/Library/Application Support/simplicity/` and in Linux it is typically in your `$HOME/.simplicity` folder.\n\nOpen it to edit it and enter in the following format.\n\n`LABEL IP:PORT MASTERNODE_KEY TX_ID INDEX`\n\n- **LABEL**: Any name that you want to call your masternode in one word. For e.g. SPL1\n- **IP:PORT**: Your masternode remote IP and port (11957 for mainnet)\n- **MASTERNODE_KEY**: This is the masternode key that you obtained from typing `masternode genkey` earlier.\n- **TX_ID**: This is the transaction ID for the transaction in which you got your 200000 SPL deposited which you obtained just now through the `masternode outputs` command.\n- **INDEX**: This is the Index of your transaction which you obtained just now through the \n`masternode outputs` command.\n\nTo make things clearer let us show a made up example of how a `masternode.conf` would look like. This example shows two masternodes.\n\n`SPL1    51.52.53.54:11957    XrxSr3fXpX3dZcU7CoiFuFWqeHYw83r28btCFfIHqf6zkMp1PZ4 \n   d6fd38868bb8f9958e34d5155437d009b72dfd33fc28874c87fd42e51c0f74fdb    0`\n\nOnce you have entered the necessary details, save your `masternode.conf`. Restart your Simplicity wallet so it would take the new settings.\n\n*Note for multiple masternodes:*\n*If you are creating more than one masternode, the `masternode outputs` command will return several transaction hashes and indexes. Just determine which one is the new one by comparing it with your existing `masternode.conf` and see which one is not in it. You will then add the new corresponding details in new line in `masternode.conf`. Remember to restart your Simplicity wallet whenever you edit your `masternode.conf`.*\n\n### Step 4: Get a VPS\nThere are many providers to choose out there. For instance:\n\n- Chunkhost\n- Digital Ocean\n- Vultr\n\nSelect a VPS package that meets the minimum requirements:\n\n- 1 GB of RAM (2 GB recommended)\n- 20+ GB of disk space\n- 1 or 2 CPU cores\n\nRemember reliability is more important than price. If your masternode goes offline, you will potentially miss out on payouts which would be more than your VPS cost.\n\nPick Ubuntu 16.04 LTS 64-bit and install it.\n\nOnce it is done, the VPS provider should give you a username (usually root) and a password.\n\nUse a SSH client like Putty or if the VPS provider provides, it open up a console window.\n\n### Step 5: Configuring Your VPS\n\n#### Creating a New User\n\nIt is always good practice to create a new user to run the masternode so that the masternode application does not run with root access.\n\nLogin as root.\n\nCreate a new user with the following command, replacing `<username>` with a username of your choice.\n\n`adduser <username>`\n\nYou will be prompted for a password. Enter and confirm using a new password (different to your root password) and store it in a safe place.\n\nYou will also see prompts for user information, but this can be left blank.\n\nOnce the user has been created, we will add them to the `sudo` (Super User Do) group so they can perform commands as root. Only commands/applications run with sudo will run with root privileges, while others will run with regular privileges. Add the user to the `sudo` group with the command:\n\n`usermod -aG sudo <username>`\n\n#### Updating the system\n\nNow, while still as root, we will update the system from the Ubuntu package repository.\n\n`apt update && apt upgrade -y`\n\n#### Installing a Firewall\n\nWe are installing UFW (uncomplicated firewall) to further secure your server. This is optional but highly recommended.\n\nWhile still in root user (or alternatively you can sudo within your newly created user).\n\n`apt install ufw -y`\n\nThe next step opens port 11957 which is required for your masternode to communicate.\n\n`ufw allow ssh/tcp`\n`ufw limit ssh/tcp`\n`ufw allow 11957/tcp`\n`ufw logging on`\n`ufw enable`\n\n(press Y and Enter to confirm)\n\nYou now have a firewall setup!\n\n#### Allocating a Swap File (Optional if your VPS/server has 4 GB or more RAM)\n\nAllocating a swap file can guard your server against out of memory errors in the event your RAM is fully utilized. This step is optional if your VPS / remote server has a lot of RAM. It is generally not needed if you have 4 GB of RAM or more.\n\nSwap is an area on a hard drive that has been designated as a place where the operating system can temporarily store data that it can no longer hold in RAM. Basically, this gives you the ability to increase the amount of information that your server can keep in its working \"memory\", with some caveats. The swap space on the hard drive will be used mainly when there is no longer sufficient space in RAM to hold in-use application data.\n\nThe information written to disk will be significantly slower than information kept in RAM, but the operating system will prefer to keep running application data in memory and use swap for the older data. Overall, having swap space as a fall back for when your RAM is depleted can be a good safety net against out-of-memory exceptions on systems.\n\nWhile still root type:\n\n`cd /`\n`dd if=/dev/zero of=swapfile bs=1M count=4000`\n`chmod 600 swapfile`\n`mkswap swapfile`\n`swapon swapfile`\n`nano etc/fstab`\n\nAdd the following line at the end of the file (press tab to separate each word/number).\n\n`/swapfile  none    swap    sw  0   0`\n\nThen press Ctrl+O and Enter to save and Ctrl+X to close the editor.\n\n#### Install basic utitlities, libraries, etc.\n\nInstall a few basic unix utilities just in case you might need them.\n\n`apt install -y git mc htop screen wget unrar unzip libboost-all-dev libevent-dev software-properties-common`\n`apt install -y protobuf-compiler libminiupnpc-dev libevent-dev libtool libssl-dev libboost-all-dev libprotobuf-dev libqrencode-dev autoconf build-essential autotools-dev automake pkg-config bsdmainutils software-properties-common python3`\n`add-apt-repository ppa:bitcoin/bitcoin`\n`apt update`\n`apt install -y libdb4.8-dev libdb4.8++-dev`\n\n#### Reboot the server\n\nYou can now reboot the server.\n\n`reboot now`\n\nYour VPS is now ready for operation.\n\n### Step 6: Installing Simplicity in your VPS\nAfter logging into the new user you created in Step 5, type the following to download the latest Simplicity package.\n\nTo make sure you are in the user's home directory type:\n\n`cd ~` or `cd`\n\nThen build the Simplicity wallet from the latest sources on GitHub.\n\n`git clone https://github.com/SimplicityDev2018/Simplicity && cd Simplicity/src/secp256k1/ && chmod +x autogen.sh && ./autogen.sh && ./configure && make && sudo make install && cd ../leveldb/ && chmod +x build_detect_platform && sudo ./build_detect_platform build_config.mk . && cd .. && sudo make -f makefile.unix`\n\n`LD_LIBRARY_PATH=/usr/local/lib && export LD_LIBRARY_PATH`\n\nCreate a new config file for your masternode. This will create a new directory and also open up a new text file called `simplicity.conf`. Type:\n\n`mkdir ~/.simplicity`\n\n`nano ~/.simplicity/simplicity.conf`\n\nIn that new file type the following and change the parts in capital letters to match your actual details. The `rpcuser` and `rpcpassword` can be anything you wish (try to make it longer a bit).\n\nThe MASTERNODE_KEY is from what you got from Step 2.\n\n`rpcuser=ANYUSERNAME`\n`rpcpassword=ANYPASSWORD`\n`rpcallowip=127.0.0.1`\n`listen=1`\n`server=1`\n`daemon=1`\n`logtimestamps=1`\n`maxconnections=64`\n`txindex=1`\n`masternode=1`\n`externalip=IP:11957`\n`masternodeprivkey=MASTERNODE_KEY`\n\nPress Ctrl+O and Enter to save and Ctrl+X to exit.\n\nType following commands to link `simplicityd` globally and run the wallet. \n\n`sudo ln -s /home/<username>/Simplicity/src/simplicityd /usr/local/bin/simplicityd`\n\nStart your `simplicityd` daemon and let it sync. This might take some time.\n\n`simplicityd -daemon`\n\nYou can always check the status of syncing and check how far the block number has gone in relation to our block explorer by typing:\n\n`simplicityd getinfo`\n\nOnce it has synced, it is now time to start your masternode!\n\n### Step 7: Start your masternode\n\nNow let us go back to your local PC wallet (not the VPS). Hopefully you will have already gotten enough confirmations on the transaction with the 200000 SPL collateral. If not, wait a bit more!\n\nRemember if you have not restarted your local wallet after creating `masternode.conf`, please restart your wallet.\n\nOnce the wallet is up again go to Help > Debug Window > Console and type:\n\n`masternode list-conf`\n\nIf you have done it correctly, it should show the masternode(s) that were listed in your `masternode.conf`.\n\nNow unlock the wallet by typing:\n\n`walletpassphrase \"<YOUR WALLET ENCRYPTION PASSWORD HERE>\" 60`\n\nYou will be asked the encryption password to your wallet. Give it and press enter. Now the wallet will be unlocked for 60 seconds.\n\nNow within the 60 seconds that the wallet will be unlocked type:\n\n`masternode start-alias \"<LABEL>\"` \n\ne.g. `masternode start-alias \"SPL1\"`\n\nYour masternode should now activate and show `PRE_ENABLED` status. After a few minutes or so, the status should transition to `ENABLED`. If the status transitions to `EXPIRED`, there might be something wrong with your setup, double check again.\n\nTo check the status type:\n\n`masternode list status \"<TRANSACTION_ID>\"`\n\n### Step 8: Getting your masternode payments\n\nYour first payment may take some time to show but payments after the first one should take place more regularly.\n\nAs an estimate, divide the total number of masternodes by the number of blocks/day and that will get you roughly the interval of your payouts in days.\n\nThe formula is \"number of masternodes\" / \"number of blocks per day\" = \"interval in days at which one can expect a payment\".\n\nIMPORTANT NOTE: Everytime you start a masternode, it resets its place in the payout queue thus delaying payments. Therefore although there is also a `masternode start-many` command, it is not recommended since it would also restart nodes that have no issues.\n\nIf one of your masternode servers has an issue (for e.g. the server was rebooted), only restart the masternodes which are down by using the `masternode start-missing` command and not the  start-many command.",
      "json_metadata": "{\"tags\":[\"simplicity\",\"masternodes\",\"cryptocurrencies\",\"tutorial\"],\"app\":\"steemit/0.1\",\"format\":\"markdown\"}"
    }
  ]
}

{
  "trx_id": "771bd5cc6abf478a8bebd69017c9c3101658e154",
  "block": 19253133,
  "trx_in_block": 20,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-01-24T08:10:15",
  "op": [
    "transfer",
    {
      "from": "money-dreamer",
      "to": "r1979",
      "amount": "0.001 STEEM",
      "memo": "Gift!"
    }
  ]
}

{
  "trx_id": "1aea37bb1f75e6a82b418d63d5d12bba90a687f6",
  "block": 17814868,
  "trx_in_block": 26,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2017-12-05T08:49:03",
  "op": [
    "vote",
    {
      "voter": "r1979",
      "author": "thecryptodrive",
      "permlink": "a-lesson-in-anonymity-bitcoin-dash-monero-and-zcash",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "9245c90b71fadc8355d17a1c105d85524267de33",
  "block": 17476280,
  "trx_in_block": 15,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2017-11-23T14:32:33",
  "op": [
    "claim_reward_balance",
    {
      "account": "r1979",
      "reward_steem": "0.000 STEEM",
      "reward_sbd": "0.000 SBD",
      "reward_vests": "154.091533 VESTS"
    }
  ]
}

{
  "trx_id": "38f50a704487d4d186deaab830bb0ba7d8fbd229",
  "block": 17239251,
  "trx_in_block": 0,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2017-11-15T08:55:54",
  "op": [
    "vote",
    {
      "voter": "r1979",
      "author": "richrico",
      "permlink": "b3coin-how-to-sync-the-wallet-tutorial",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "0000000000000000000000000000000000000000",
  "block": 17147581,
  "trx_in_block": 4294967295,
  "op_in_trx": 0,
  "virtual_op": 2,
  "timestamp": "2017-11-12T04:31:54",
  "op": [
    "curation_reward",
    {
      "curator": "r1979",
      "reward": "88.336970 VESTS",
      "comment_author": "fredyendesigns",
      "comment_permlink": "tutorial-how-to-install-3-chaincoin-masternodes-on-1-vps"
    }
  ]
}

{
  "trx_id": "c62f6d4682f1d74b7d437ae482dfb200ed776bda",
  "block": 17016506,
  "trx_in_block": 9,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2017-11-07T15:10:39",
  "op": [
    "vote",
    {
      "voter": "r1979",
      "author": "fredyendesigns",
      "permlink": "tutorial-how-to-install-3-chaincoin-masternodes-on-1-vps",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "856e31898ae3a21b544a038aeefa52bef9a1ccf5",
  "block": 17016491,
  "trx_in_block": 22,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2017-11-07T15:09:54",
  "op": [
    "custom_json",
    {
      "required_auths": [],
      "required_posting_auths": [
        "r1979"
      ],
      "id": "follow",
      "json": "[\"follow\",{\"follower\":\"r1979\",\"following\":\"fredyendesigns\",\"what\":[\"blog\"]}]"
    }
  ]
}

{
  "trx_id": "0000000000000000000000000000000000000000",
  "block": 17016229,
  "trx_in_block": 4294967295,
  "op_in_trx": 0,
  "virtual_op": 9,
  "timestamp": "2017-11-07T14:56:51",
  "op": [
    "curation_reward",
    {
      "curator": "r1979",
      "reward": "65.754563 VESTS",
      "comment_author": "rnkhouse",
      "comment_permlink": "zencash-secure-node-script"
    }
  ]
}

{
  "trx_id": "5dbe7ddbe58c10944d656c8739764a8089aaf8de",
  "block": 16969284,
  "trx_in_block": 2,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2017-11-05T23:48:57",
  "op": [
    "comment",
    {
      "parent_author": "r1979",
      "parent_permlink": "re-rnkhouse-zencash-secure-node-script-20171105t192128456z",
      "author": "rnkhouse",
      "permlink": "re-r1979-re-rnkhouse-zencash-secure-node-script-20171105t234856903z",
      "title": "",
      "body": "You're welcome! :)",
      "json_metadata": "{\"tags\":[\"zencash\"],\"app\":\"steemit/0.1\"}"
    }
  ]
}

{
  "trx_id": "ec18aff2bd2b5aad6eec675f6c08c80b2c0b5c41",
  "block": 16969270,
  "trx_in_block": 10,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2017-11-05T23:48:15",
  "op": [
    "vote",
    {
      "voter": "rnkhouse",
      "author": "r1979",
      "permlink": "re-rnkhouse-zencash-secure-node-script-20171105t192128456z",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "c88c18f34fce7b52ff1497b542253edf5bf01502",
  "block": 16963939,
  "trx_in_block": 34,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2017-11-05T19:21:27",
  "op": [
    "comment",
    {
      "parent_author": "rnkhouse",
      "parent_permlink": "zencash-secure-node-script",
      "author": "r1979",
      "permlink": "re-rnkhouse-zencash-secure-node-script-20171105t192128456z",
      "title": "",
      "body": "Thanks for the useful info!",
      "json_metadata": "{\"tags\":[\"zencash\"],\"app\":\"steemit/0.1\"}"
    }
  ]
}

{
  "trx_id": "f4dc1f56caffa20d9160121e091ae6b2783e2779",
  "block": 16963936,
  "trx_in_block": 0,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2017-11-05T19:21:18",
  "op": [
    "vote",
    {
      "voter": "r1979",
      "author": "rnkhouse",
      "permlink": "zencash-secure-node-script",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "8ce6f3b5f9925a4eace10f4010ddf5f85ec55ddc",
  "block": 16886459,
  "trx_in_block": 4,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2017-11-03T02:45:36",
  "op": [
    "comment",
    {
      "parent_author": "r1979",
      "parent_permlink": "re-toonpunk-re-r1979-re-toonpunk-3rd-party-platforms-to-sell-your-art-and-designs-20170426t073352245z",
      "author": "movievigilante",
      "permlink": "re-r1979-re-toonpunk-re-r1979-re-toonpunk-3rd-party-platforms-to-sell-your-art-and-designs-20171103t024535656z",
      "title": "",
      "body": "Zazzle or Spreadshirt might be your best bet.",
      "json_metadata": "{\"tags\":[\"art\"],\"app\":\"steemit/0.1\"}"
    }
  ]
}

{
  "trx_id": "ee2032e21b8c384171d026273d73650d78703495",
  "block": 16562324,
  "trx_in_block": 9,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2017-10-22T20:31:57",
  "op": [
    "transfer_to_savings",
    {
      "from": "r1979",
      "to": "r1979",
      "amount": "1.453 SBD",
      "memo": ""
    }
  ]
}

{
  "trx_id": "741556c37bab907b3d9ac5fce0d6b0bcf41eb05d",
  "block": 16562303,
  "trx_in_block": 0,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2017-10-22T20:30:54",
  "op": [
    "claim_reward_balance",
    {
      "account": "r1979",
      "reward_steem": "0.000 STEEM",
      "reward_sbd": "1.453 SBD",
      "reward_vests": "4422.010318 VESTS"
    }
  ]
}

{
  "trx_id": "0000000000000000000000000000000000000000",
  "block": 16494381,
  "trx_in_block": 4294967295,
  "op_in_trx": 0,
  "virtual_op": 9,
  "timestamp": "2017-10-20T11:52:54",
  "op": [
    "author_reward",
    {
      "author": "r1979",
      "permlink": "re-zvnowman-building-a-hello-world-smart-contract-on-ethereum-20171013t115253756z",
      "sbd_payout": "0.048 SBD",
      "steem_payout": "0.000 STEEM",
      "vesting_payout": "96.666945 VESTS"
    }
  ]
}

{
  "trx_id": "0000000000000000000000000000000000000000",
  "block": 16494381,
  "trx_in_block": 4294967295,
  "op_in_trx": 0,
  "virtual_op": 8,
  "timestamp": "2017-10-20T11:52:54",
  "op": [
    "curation_reward",
    {
      "curator": "r1979",
      "reward": "63.759049 VESTS",
      "comment_author": "r1979",
      "comment_permlink": "re-zvnowman-building-a-hello-world-smart-contract-on-ethereum-20171013t115253756z"
    }
  ]
}

{
  "trx_id": "0000000000000000000000000000000000000000",
  "block": 16494367,
  "trx_in_block": 4294967295,
  "op_in_trx": 0,
  "virtual_op": 4,
  "timestamp": "2017-10-20T11:52:12",
  "op": [
    "author_reward",
    {
      "author": "r1979",
      "permlink": "re-chesatochi-wow-bitcoin-at-5600usd-20171013t115210199z",
      "sbd_payout": "0.074 SBD",
      "steem_payout": "0.000 STEEM",
      "vesting_payout": "148.085537 VESTS"
    }
  ]
}

{
  "trx_id": "0000000000000000000000000000000000000000",
  "block": 16494367,
  "trx_in_block": 4294967295,
  "op_in_trx": 0,
  "virtual_op": 2,
  "timestamp": "2017-10-20T11:52:12",
  "op": [
    "curation_reward",
    {
      "curator": "r1979",
      "reward": "43.191615 VESTS",
      "comment_author": "r1979",
      "comment_permlink": "re-chesatochi-wow-bitcoin-at-5600usd-20171013t115210199z"
    }
  ]
}

{
  "trx_id": "0000000000000000000000000000000000000000",
  "block": 16494340,
  "trx_in_block": 4294967295,
  "op_in_trx": 0,
  "virtual_op": 4,
  "timestamp": "2017-10-20T11:50:51",
  "op": [
    "author_reward",
    {
      "author": "r1979",
      "permlink": "re-kouba01-will-virtual-currencies-destroy-national-currencies-20171013t115048328z",
      "sbd_payout": "0.056 SBD",
      "steem_payout": "0.000 STEEM",
      "vesting_payout": "113.120902 VESTS"
    }
  ]
}

{
  "trx_id": "0000000000000000000000000000000000000000",
  "block": 16494340,
  "trx_in_block": 4294967295,
  "op_in_trx": 0,
  "virtual_op": 2,
  "timestamp": "2017-10-20T11:50:51",
  "op": [
    "curation_reward",
    {
      "curator": "r1979",
      "reward": "53.475335 VESTS",
      "comment_author": "r1979",
      "comment_permlink": "re-kouba01-will-virtual-currencies-destroy-national-currencies-20171013t115048328z"
    }
  ]
}

{
  "trx_id": "0000000000000000000000000000000000000000",
  "block": 16494302,
  "trx_in_block": 4294967295,
  "op_in_trx": 0,
  "virtual_op": 2,
  "timestamp": "2017-10-20T11:48:57",
  "op": [
    "curation_reward",
    {
      "curator": "r1979",
      "reward": "6.170231 VESTS",
      "comment_author": "zvnowman",
      "comment_permlink": "building-a-hello-world-smart-contract-on-ethereum"
    }
  ]
}

{
  "trx_id": "0000000000000000000000000000000000000000",
  "block": 16494278,
  "trx_in_block": 4294967295,
  "op_in_trx": 0,
  "virtual_op": 5,
  "timestamp": "2017-10-20T11:47:45",
  "op": [
    "author_reward",
    {
      "author": "r1979",
      "permlink": "re-abhi3700-crypto-update-3-pivx-piv-v-s-monero-xmr-who-will-win-20171013t114744696z",
      "sbd_payout": "0.052 SBD",
      "steem_payout": "0.000 STEEM",
      "vesting_payout": "104.893939 VESTS"
    }
  ]
}

{
  "trx_id": "0000000000000000000000000000000000000000",
  "block": 16494278,
  "trx_in_block": 4294967295,
  "op_in_trx": 0,
  "virtual_op": 3,
  "timestamp": "2017-10-20T11:47:45",
  "op": [
    "curation_reward",
    {
      "curator": "r1979",
      "reward": "57.588829 VESTS",
      "comment_author": "r1979",
      "comment_permlink": "re-abhi3700-crypto-update-3-pivx-piv-v-s-monero-xmr-who-will-win-20171013t114744696z"
    }
  ]
}

{
  "trx_id": "0000000000000000000000000000000000000000",
  "block": 16494271,
  "trx_in_block": 4294967295,
  "op_in_trx": 0,
  "virtual_op": 2,
  "timestamp": "2017-10-20T11:47:24",
  "op": [
    "curation_reward",
    {
      "curator": "r1979",
      "reward": "4.113487 VESTS",
      "comment_author": "kouba01",
      "comment_permlink": "will-virtual-currencies-destroy-national-currencies"
    }
  ]
}

{
  "trx_id": "0000000000000000000000000000000000000000",
  "block": 16494232,
  "trx_in_block": 4294967295,
  "op_in_trx": 0,
  "virtual_op": 4,
  "timestamp": "2017-10-20T11:45:27",
  "op": [
    "author_reward",
    {
      "author": "r1979",
      "permlink": "re-blechy-did-you-know-you-can-claim-small-amounts-of-free-bitcoin-online-20171013t114527193z",
      "sbd_payout": "0.054 SBD",
      "steem_payout": "0.000 STEEM",
      "vesting_payout": "111.064180 VESTS"
    }
  ]
}