{
  "trx_id": "5becff1bf1032918b479f5c20254bfa8273976be",
  "block": 106143494,
  "trx_in_block": 2,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2026-05-18T00:17:27",
  "op": [
    "delegate_vesting_shares",
    {
      "delegator": "steem",
      "delegatee": "feuerfluss",
      "vesting_shares": "7112.519176 VESTS"
    }
  ]
}

{
  "trx_id": "030b70046e83925a257eef3a892b08d124226b99",
  "block": 105975907,
  "trx_in_block": 0,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2026-05-12T04:00:15",
  "op": [
    "delegate_vesting_shares",
    {
      "delegator": "steem",
      "delegatee": "feuerfluss",
      "vesting_shares": "4400.308771 VESTS"
    }
  ]
}

{
  "trx_id": "c28480ec9034e036b783c9432fb4700f9be99f07",
  "block": 105511143,
  "trx_in_block": 0,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2026-04-25T23:38:15",
  "op": [
    "delegate_vesting_shares",
    {
      "delegator": "steem",
      "delegatee": "feuerfluss",
      "vesting_shares": "7125.034932 VESTS"
    }
  ]
}

{
  "trx_id": "d7cf621db60fbf2b8205a03bae26bfc9a5a8e356",
  "block": 102851932,
  "trx_in_block": 0,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2026-01-23T07:54:15",
  "op": [
    "delegate_vesting_shares",
    {
      "delegator": "steem",
      "delegatee": "feuerfluss",
      "vesting_shares": "4441.855590 VESTS"
    }
  ]
}

{
  "trx_id": "26d88f617b80c787a4b91ca715d194ab59c50c85",
  "block": 91298340,
  "trx_in_block": 1,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2024-12-17T03:13:18",
  "op": [
    "delegate_vesting_shares",
    {
      "delegator": "steem",
      "delegatee": "feuerfluss",
      "vesting_shares": "4606.074787 VESTS"
    }
  ]
}

{
  "trx_id": "b01ca83ddad1095c2bf57e91a6f818887e7b2941",
  "block": 79852538,
  "trx_in_block": 7,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2023-11-13T18:56:03",
  "op": [
    "delegate_vesting_shares",
    {
      "delegator": "steem",
      "delegatee": "feuerfluss",
      "vesting_shares": "4775.208319 VESTS"
    }
  ]
}

{
  "trx_id": "11643a7ef504bf3630421922b3b0fcebeac9d352",
  "block": 78347877,
  "trx_in_block": 3,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2023-09-21T21:52:18",
  "op": [
    "delegate_vesting_shares",
    {
      "delegator": "steem",
      "delegatee": "feuerfluss",
      "vesting_shares": "7712.487105 VESTS"
    }
  ]
}

{
  "trx_id": "008d0f41c0499a91aee34718932ffca312184200",
  "block": 69113212,
  "trx_in_block": 0,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2022-11-03T11:39:48",
  "op": [
    "delegate_vesting_shares",
    {
      "delegator": "steem",
      "delegatee": "feuerfluss",
      "vesting_shares": "7934.168543 VESTS"
    }
  ]
}

{
  "trx_id": "cc31193492daf76dad896a894b0f422511a5ddcc",
  "block": 60809383,
  "trx_in_block": 38,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2022-01-17T10:55:57",
  "op": [
    "delegate_vesting_shares",
    {
      "delegator": "steem",
      "delegatee": "feuerfluss",
      "vesting_shares": "8154.701774 VESTS"
    }
  ]
}

{
  "trx_id": "1983e5bcc493f51b9f92944f1c0104ace1d0b02d",
  "block": 54607771,
  "trx_in_block": 5,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2021-06-14T00:51:12",
  "op": [
    "delegate_vesting_shares",
    {
      "delegator": "steem",
      "delegatee": "feuerfluss",
      "vesting_shares": "8338.470432 VESTS"
    }
  ]
}

{
  "trx_id": "2bcafeefefe7fd07a5a498993a0d45624e00e1bd",
  "block": 49355225,
  "trx_in_block": 0,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2020-12-11T11:09:48",
  "op": [
    "delegate_vesting_shares",
    {
      "delegator": "steem",
      "delegatee": "feuerfluss",
      "vesting_shares": "8525.892406 VESTS"
    }
  ]
}

{
  "trx_id": "729e8648e8eaa95052884a38e59847c9a11ca51b",
  "block": 49206790,
  "trx_in_block": 0,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2020-12-06T04:47:03",
  "op": [
    "delegate_vesting_shares",
    {
      "delegator": "steem",
      "delegatee": "feuerfluss",
      "vesting_shares": "1912.543513 VESTS"
    }
  ]
}

{
  "trx_id": "eaf08a697d7217f49f541b5953ba80971d533ead",
  "block": 49190322,
  "trx_in_block": 0,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2020-12-05T14:48:00",
  "op": [
    "delegate_vesting_shares",
    {
      "delegator": "steem",
      "delegatee": "feuerfluss",
      "vesting_shares": "8532.100260 VESTS"
    }
  ]
}

{
  "trx_id": "bc4d92347ebf5d1687c6d63b83957cb4d9e9cafd",
  "block": 48257901,
  "trx_in_block": 2,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2020-11-02T15:43:27",
  "op": [
    "delegate_vesting_shares",
    {
      "delegator": "steem",
      "delegatee": "feuerfluss",
      "vesting_shares": "1920.017158 VESTS"
    }
  ]
}

{
  "trx_id": "87c98afb4b07287429ccd9975c5923522be45eb1",
  "block": 43217036,
  "trx_in_block": 10,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2020-05-09T05:44:21",
  "op": [
    "delegate_vesting_shares",
    {
      "delegator": "steem",
      "delegatee": "feuerfluss",
      "vesting_shares": "8734.905619 VESTS"
    }
  ]
}

{
  "trx_id": "e1d38f1d79ec3ec1561dad3d9dcaa8f6304420ec",
  "block": 43193140,
  "trx_in_block": 22,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2020-05-08T09:20:51",
  "op": [
    "delegate_vesting_shares",
    {
      "delegator": "steem",
      "delegatee": "feuerfluss",
      "vesting_shares": "1953.311140 VESTS"
    }
  ]
}

{
  "trx_id": "66f53113dfec370ae7d497d604464f37dbcd46b3",
  "block": 43030842,
  "trx_in_block": 9,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2020-05-02T14:43:27",
  "op": [
    "delegate_vesting_shares",
    {
      "delegator": "steem",
      "delegatee": "feuerfluss",
      "vesting_shares": "8738.663697 VESTS"
    }
  ]
}

{
  "trx_id": "5731229ec687153bedd14af660d430f580483e65",
  "block": 35984009,
  "trx_in_block": 2,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2019-08-29T23:09:00",
  "op": [
    "comment",
    {
      "parent_author": "feuerfluss",
      "parent_permlink": "usb-solarladegeraet-eigenbau",
      "author": "steemitboard",
      "permlink": "steemitboard-notify-feuerfluss-20190829t230900000z",
      "title": "",
      "body": "Congratulations @feuerfluss! You received a personal award!\n\n<table><tr><td>https://steemitimages.com/70x70/http://steemitboard.com/@feuerfluss/birthday2.png</td><td>Happy Birthday! - You are on the Steem blockchain for 2 years!</td></tr></table>\n\n<sub>_You can view [your badges on your Steem Board](https://steemitboard.com/@feuerfluss) and compare to others on the [Steem Ranking](https://steemitboard.com/ranking/index.php?name=feuerfluss)_</sub>\n\n\n###### [Vote for @Steemitboard as a witness](https://v2.steemconnect.com/sign/account-witness-vote?witness=steemitboard&approve=1) to get one more award and increased upvotes!",
      "json_metadata": "{\"image\":[\"https://steemitboard.com/img/notify.png\"]}"
    }
  ]
}

{
  "trx_id": "12d6cb5a6537cfc2e237ec91975db121f4dffd60",
  "block": 33306594,
  "trx_in_block": 11,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2019-05-28T15:25:51",
  "op": [
    "delegate_vesting_shares",
    {
      "delegator": "steem",
      "delegatee": "feuerfluss",
      "vesting_shares": "8934.116970 VESTS"
    }
  ]
}

{
  "trx_id": "dded769ed2c29450e3f69c2e3fc4da2063563655",
  "block": 23011067,
  "trx_in_block": 8,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-06-03T23:02:24",
  "op": [
    "delegate_vesting_shares",
    {
      "delegator": "steem",
      "delegatee": "feuerfluss",
      "vesting_shares": "9133.454747 VESTS"
    }
  ]
}

{
  "trx_id": "3f25b7c23f8d3b576ee414d1b3115663303993af",
  "block": 21771146,
  "trx_in_block": 13,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-04-21T20:42:54",
  "op": [
    "delegate_vesting_shares",
    {
      "delegator": "steem",
      "delegatee": "feuerfluss",
      "vesting_shares": "29531.027318 VESTS"
    }
  ]
}

{
  "trx_id": "46a51b73556ea9c9622e97098107bfa0c3ff63f0",
  "block": 20389910,
  "trx_in_block": 19,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-03-04T20:26:39",
  "op": [
    "vote",
    {
      "voter": "flash4yard",
      "author": "feuerfluss",
      "permlink": "re-flash4yard-part-1-2-3d-printed-raspberry-pi-casing-eng-ger-20180304t192007692z",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "3f9aa4152ec11236be0c6d8765bee3ec2f613a4e",
  "block": 20389908,
  "trx_in_block": 56,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-03-04T20:26:33",
  "op": [
    "comment",
    {
      "parent_author": "feuerfluss",
      "parent_permlink": "re-flash4yard-part-1-2-3d-printed-raspberry-pi-casing-eng-ger-20180304t192007692z",
      "author": "flash4yard",
      "permlink": "re-feuerfluss-re-flash4yard-part-1-2-3d-printed-raspberry-pi-casing-eng-ger-20180304t202633566z",
      "title": "",
      "body": "Cool das mal jemand einen Kommentar schreibt!\nWas läuft auf deinem Raspi?\nVielleicht schreib ich morgen etwas. Habe heute etwas gedruckt an dem was zum drucken zeigen/ erklären kann :D",
      "json_metadata": "{\"tags\":[\"print\"],\"app\":\"steemit/0.1\"}"
    }
  ]
}

{
  "trx_id": "314c3ebec27435155fe3fd758fbcd0e0ef604bbf",
  "block": 20389780,
  "trx_in_block": 34,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-03-04T20:20:09",
  "op": [
    "comment",
    {
      "parent_author": "flash4yard",
      "parent_permlink": "part-1-2-3d-printed-raspberry-pi-casing-eng-ger",
      "author": "feuerfluss",
      "permlink": "re-flash4yard-part-1-2-3d-printed-raspberry-pi-casing-eng-ger-20180304t192007692z",
      "title": "",
      "body": "Hey Cool!\nMein Raspi läuft zwar 24/7, hat aber noch nie ein Gehäuse gesehen. Sieht von den Flächen echt gelungen aus. - Schreib doch mal was zum Drucken selbst.",
      "json_metadata": "{\"tags\":[\"print\"],\"app\":\"steemit/0.1\"}"
    }
  ]
}

{
  "trx_id": "7df1ff7b0e1751e2b86ae4bfbbc894bdd0e56fb5",
  "block": 20389699,
  "trx_in_block": 33,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-03-04T20:16:06",
  "op": [
    "vote",
    {
      "voter": "feuerfluss",
      "author": "flash4yard",
      "permlink": "part-1-2-3d-printed-raspberry-pi-casing-eng-ger",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "c1fc764d7f4aecb39ed856ca4823fda8c36585d9",
  "block": 20389363,
  "trx_in_block": 7,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-03-04T19:59:18",
  "op": [
    "vote",
    {
      "voter": "feuerfluss",
      "author": "virtualcoin",
      "permlink": "mining-ethereum-using-a-rx-580-gpu-for-linux",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "18b03d56a374b3f0a1bc0d321d26e6b232053826",
  "block": 20389353,
  "trx_in_block": 17,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-03-04T19:58:48",
  "op": [
    "comment",
    {
      "parent_author": "virtualcoin",
      "parent_permlink": "mining-ethereum-using-a-rx-580-gpu-for-linux",
      "author": "feuerfluss",
      "permlink": "re-virtualcoin-mining-ethereum-using-a-rx-580-gpu-for-linux-20180304t185844908z",
      "title": "",
      "body": "Thank you for this tutorial. After Microsoft decided to stop my little Miner by an update of Win10 i installed ubuntu with AMD RX drivers as described above. Up to now it works fine without any reboot after installation of the driver and mining software. \nThe only thing i have had to do extra in windows was to flash the BIOS of the VideoCard back to the original Version. Else X11 and the miner won´t work. - Unfortunately the AMD Linux driver is same small-minded in overclocking than in windows.",
      "json_metadata": "{\"tags\":[\"mining\"],\"app\":\"steemit/0.1\"}"
    }
  ]
}

{
  "trx_id": "2755473f412cec7261e76f9a1e15be70f3cdd598",
  "block": 19863272,
  "trx_in_block": 32,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-14T13:16:24",
  "op": [
    "comment",
    {
      "parent_author": "feuerfluss",
      "parent_permlink": "re-flash4yard-atmel-at89s8253-based-microcontroller-or-school-project-20180212t215659664z",
      "author": "flash4yard",
      "permlink": "re-feuerfluss-re-flash4yard-atmel-at89s8253-based-microcontroller-or-school-project-20180214t131624756z",
      "title": "",
      "body": "I have build something with an arduino. I will present it in another post :D",
      "json_metadata": "{\"tags\":[\"life\"],\"app\":\"steemit/0.1\"}"
    }
  ]
}

{
  "trx_id": "0c806392cd5db2b93e185e37c26d380a4ece8f3e",
  "block": 19863257,
  "trx_in_block": 45,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-14T13:15:39",
  "op": [
    "comment",
    {
      "parent_author": "feuerfluss",
      "parent_permlink": "re-flash4yard-atmel-at89s8253-based-microcontroller-or-school-project-20180212t215659664z",
      "author": "flash4yard",
      "permlink": "re-feuerfluss-re-flash4yard-atmel-at89s8253-based-microcontroller-or-school-project-20180214t131540054z",
      "title": "",
      "body": "Thanks for your comment. \nI would rather use an arduino because it is alot easier to programm. And the Atmel AT89S8253 has no analog to digital converter so potentiometers cant be used also it cant output pwm signals.\nYou are very limited, but it was fun to see how it works.\nWriting in assembler is very hard and takes a lot of time",
      "json_metadata": "{\"tags\":[\"life\"],\"app\":\"steemit/0.1\"}"
    }
  ]
}

{
  "trx_id": "2f20a03b953f0b6159fd0ff76e53f29624dd4469",
  "block": 19841084,
  "trx_in_block": 64,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-13T18:45:33",
  "op": [
    "vote",
    {
      "voter": "dmxmaster",
      "author": "feuerfluss",
      "permlink": "re-dmxmaster-re-feuerfluss-usb-solarladegeraet-eigenbau-20180212t213406174z",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "f082926b73042ddd50d9ee5871ae2b0b24a31f60",
  "block": 19816214,
  "trx_in_block": 44,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-12T22:00:57",
  "op": [
    "custom_json",
    {
      "required_auths": [],
      "required_posting_auths": [
        "feuerfluss"
      ],
      "id": "follow",
      "json": "[\"follow\",{\"follower\":\"feuerfluss\",\"following\":\"flash4yard\",\"what\":[\"blog\"]}]"
    }
  ]
}

{
  "trx_id": "4e5ca9b1c0fadfb9954489e49d0c164fc74e5b20",
  "block": 19816213,
  "trx_in_block": 11,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-12T22:00:54",
  "op": [
    "custom_json",
    {
      "required_auths": [],
      "required_posting_auths": [
        "feuerfluss"
      ],
      "id": "follow",
      "json": "[\"follow\",{\"follower\":\"feuerfluss\",\"following\":\"dmxmaster\",\"what\":[\"blog\"]}]"
    }
  ]
}

{
  "trx_id": "f5edadb7753c2c8cab82aea8bf82bb71a45977f5",
  "block": 19816138,
  "trx_in_block": 29,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-12T21:57:09",
  "op": [
    "comment",
    {
      "parent_author": "flash4yard",
      "parent_permlink": "atmel-at89s8253-based-microcontroller-or-school-project",
      "author": "feuerfluss",
      "permlink": "re-flash4yard-atmel-at89s8253-based-microcontroller-or-school-project-20180212t215659664z",
      "title": "",
      "body": "Wow that´s a lot of work. If you use your Atmel now in any real project (from automatic timer over water your flowers to electric door lock ) that could be subject in your next blogs",
      "json_metadata": "{\"tags\":[\"life\"],\"app\":\"steemit/0.1\"}"
    }
  ]
}

{
  "trx_id": "069a8983015f0ad008a13e8bee957144c625e3eb",
  "block": 19815847,
  "trx_in_block": 23,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-12T21:42:33",
  "op": [
    "vote",
    {
      "voter": "feuerfluss",
      "author": "flash4yard",
      "permlink": "atmel-at89s8253-based-microcontroller-or-school-project",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "5f56e38e49406f21756c81b0f00ec085e88f6225",
  "block": 19815681,
  "trx_in_block": 18,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-12T21:34:15",
  "op": [
    "comment",
    {
      "parent_author": "dmxmaster",
      "parent_permlink": "re-feuerfluss-usb-solarladegeraet-eigenbau-20180212t150251751z",
      "author": "feuerfluss",
      "permlink": "re-dmxmaster-re-feuerfluss-usb-solarladegeraet-eigenbau-20180212t213406174z",
      "title": "",
      "body": "Danke dmxmaster. Ist übrigens die die erste Rückmeldung die ich zu einem meiner schon fast drei ernstzunehmenden Beiträge erhalte. Ein paar Ideen rund um Akkus und Solar habe ich noch. Muss aber vor dem nächsten Beitrag noch ein paar Foto´s machen.",
      "json_metadata": "{\"tags\":[\"usbladegeraet\"],\"app\":\"steemit/0.1\"}"
    }
  ]
}

{
  "trx_id": "f2d035dedb8b877882f6c75f0b650411e42dfeae",
  "block": 19812561,
  "trx_in_block": 35,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-12T18:58:03",
  "op": [
    "vote",
    {
      "voter": "flash4yard",
      "author": "feuerfluss",
      "permlink": "usb-solarladegeraet-eigenbau",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "d8bd6c601dc90cb0df900506a1a7ff43cb577df2",
  "block": 19807865,
  "trx_in_block": 4,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-12T15:03:03",
  "op": [
    "comment",
    {
      "parent_author": "feuerfluss",
      "parent_permlink": "usb-solarladegeraet-eigenbau",
      "author": "dmxmaster",
      "permlink": "re-feuerfluss-usb-solarladegeraet-eigenbau-20180212t150251751z",
      "title": "",
      "body": "Gute Idee. Mach so weiter!",
      "json_metadata": "{\"tags\":[\"usbladegeraet\"],\"app\":\"steemit/0.1\"}"
    }
  ]
}

{
  "trx_id": "a27c361ddff13a35076d04b1eee77a4bed3d654d",
  "block": 19807861,
  "trx_in_block": 39,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-12T15:02:51",
  "op": [
    "comment",
    {
      "parent_author": "feuerfluss",
      "parent_permlink": "usb-solarladegeraet-eigenbau",
      "author": "dmxmaster",
      "permlink": "re-feuerfluss-usb-solarladegeraet-eigenbau-20180212t150251751z",
      "title": "",
      "body": "Gute Idee. Mach so weiter.",
      "json_metadata": "{\"tags\":[\"usbladegeraet\"],\"app\":\"steemit/0.1\"}"
    }
  ]
}

{
  "trx_id": "b858e6699065d845a93efa855fcc08e6296807e5",
  "block": 19807755,
  "trx_in_block": 23,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-12T14:57:33",
  "op": [
    "vote",
    {
      "voter": "dmxmaster",
      "author": "feuerfluss",
      "permlink": "usb-solarladegeraet-eigenbau",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "644c9de3346349c65c0d416e8453532d4da12c53",
  "block": 19798981,
  "trx_in_block": 3,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-12T07:38:39",
  "op": [
    "vote",
    {
      "voter": "onebartender",
      "author": "feuerfluss",
      "permlink": "usb-solarladegeraet-eigenbau",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "0000000000000000000000000000000000000000",
  "block": 19787878,
  "trx_in_block": 4294967295,
  "op_in_trx": 0,
  "virtual_op": 25,
  "timestamp": "2018-02-11T22:23:12",
  "op": [
    "author_reward",
    {
      "author": "feuerfluss",
      "permlink": "powerbank-eigenbau-aus-alten-handy-akku-s",
      "sbd_payout": "0.143 SBD",
      "steem_payout": "0.000 STEEM",
      "vesting_payout": "75.660975 VESTS"
    }
  ]
}

{
  "trx_id": "ded7482d892bd2c5128e5ac61a4ac878be5b731c",
  "block": 19786857,
  "trx_in_block": 6,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-11T21:32:00",
  "op": [
    "custom_json",
    {
      "required_auths": [],
      "required_posting_auths": [
        "feuerfluss"
      ],
      "id": "follow",
      "json": "[\"follow\",{\"follower\":\"feuerfluss\",\"following\":\"deineip\",\"what\":[]}]"
    }
  ]
}

{
  "trx_id": "e54ec548dcde37b907c12143e8e25e7b77c60a41",
  "block": 19786675,
  "trx_in_block": 9,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-11T21:22:54",
  "op": [
    "custom_json",
    {
      "required_auths": [],
      "required_posting_auths": [
        "feuerfluss"
      ],
      "id": "follow",
      "json": "[\"follow\",{\"follower\":\"feuerfluss\",\"following\":\"deineip\",\"what\":[\"blog\"]}]"
    }
  ]
}

{
  "trx_id": "89fa5ce9cd904893662210806750c08dabc82255",
  "block": 19786651,
  "trx_in_block": 1,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-11T21:21:42",
  "op": [
    "vote",
    {
      "voter": "feuerfluss",
      "author": "deineip",
      "permlink": "die-festival-packliste",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "34b66241ec8e6db0e04b088858bb01ec3f6ac1e0",
  "block": 19786324,
  "trx_in_block": 51,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-11T21:05:21",
  "op": [
    "comment",
    {
      "parent_author": "",
      "parent_permlink": "usbladegeraet",
      "author": "feuerfluss",
      "permlink": "usb-solarladegeraet-eigenbau",
      "title": "USB Solarladegerät Eigenbau",
      "body": "Viele Solarlampen für den Garten halten nur ein oder zwei Sommer. Dann sind die kleinen Akku´s Schrott oder die Elektronik ist verrostet. Die Solarzelle ist dabei meist noch in Ordnung. Lediglich die Kunststoffabdeckung wird manchmal matt und lässt nicht mehr viel Licht durch.\nIch habe mir so eine Solarlampe hergenommen und die Elektronik entfernt. Vom Solarmodul kommt nun das rote Kabel für Plus und das schwarze Kabel für Minus. Das schöne an diesem Solarmodul ist, dass es aus ziemlich vielen Zellen besteht. Hier sind 7 Zellen in 2 Reihen zu sehen. Die bringen also 14*0,5V=7Volt wenn die Sonne sie voll trifft. \n\n![1.jpg](https://steemitimages.com/DQmVkgPmrwyNczQCzmZgTtGBCf4rqKJ5uCE8mjFhjZbHw79/1.jpg)\n\nDie beiden Leitungen habe ich mit einem USB-Adapter für die 12V Steckdose im Auto verbunden. Plus ist beim Stecker vorn. Ihr seht wie ich den Draht um den Stecker gewickelt habe. Minus ist an der Seite. Da gibt es zwei Klammern. Nicht jede muss Kontakt zur Elektronik haben. Da hilft nur ausprobieren oder beide Klammern mit dem schwarzen Kabel für Minus verbinden. Die rote LED am Adapter leuchtet. Die Verkabelung stimmt und Energie ist auch da.\n\n![2.jpg](https://steemitimages.com/DQmV9ywsACWs7kFvyhCQZsVaEnamMiXyJaquUemrVojUVRN/2.jpg)\n\nNicht jeder Adapter eignet sich schon ab 7V. Dabei gehen die Preiswerten (die sich stärker erwärmen) oft bei niedriger Spannung als die etwas Teureren (die unter Last kaum Abwärme haben). \nMeine Eigenbau-Powerbank habe ich schon vorgestellt.\nhttps://steemit.com/powerbank/@feuerfluss/powerbank-eigenbau-aus-alten-handy-akku-s\nAn der Elektronik der Powerbank leuchtet eine weiße LED. Die Powerbank wird also geladen.\n\n![3.jpg](https://steemitimages.com/DQmdVNs6DzXgQsAjdbsMzibRG9MnYxg2KgZDKLwFVy3RuKa/3.jpg)\n\nVon einem so kleinen Solarmodul darf man keine Wunder erwarten. Eine Powerbank aufzuladen kann durchaus ein paar Wochen dauern. Solartaschenlampen oder Handy´s mit je nur einer Lithium-Zelle laden schneller, verweigern aber manchmal das Laden wenn zu wenig Strom kommt. Powerbänke dagegen laden auch schon bei sehr kleinen Strömen.\n\n![4.jpg](https://steemitimages.com/DQmXzqGzd8cALqSGNWknjsWVWLkSgc7QCX5VHhjP7LvYn5F/4.jpg)\n\nUm für den USB-Adapter den 12V aus dem Auto näher zu kommen (eigentlich sind es dort 14,4V), habe ich ein zweites Solarmodul mit dem Ersten in Reihe geschaltet. Also einfach den Plus von dem einen Modul an den Minus des Anderen. Das zweite Modul hat 4 Zellen, die etwa so groß sind wie die des Ersten. Mit den 4 Zellen kommen 2V dazu. Am USB-Adapter kommen nun bis zu 9V an. So wird er auch noch mit 7V versorgt, wenn die Sonne nicht so stark scheint.\n\n![5.jpg](https://steemitimages.com/DQmNtiQc5mHKmHnX3NmJy69d4hoAnU2864S3upWen12buPs/5.jpg)\n\nWenn ihr so ein Solarladegerät nachbauen wollt, aber nur die kleinen Gartenlampen habt, dann geht das auch. Die meisten Solarlampen haben nur 4 Zellen und kommen so nur auf 2V. Ihr müsst also die Solarmodule mehrere solcher Lampen in Reihe schalten. Die alte Elektronik kommt in den Elektroschrott, der alte Akku ins Batterierecycling. Hier wird nur das Solarmodul gebraucht.\nAb 4 solcher Solarmodule erreicht ihr 8V und der Wandler sollte laufen. Nehmt maximal 8 solcher Module in Reihe. Mit 16V erreicht ihr so die höchste Spannung, die auch im Auto vorkommen kann. Für mehr Spannung ist der USB-Adapter nicht gebaut.\nMehr Strom dagegen stört ihn nicht. Wenn ihr beispielsweise 10 alte Lampen haben solltet, dann könnt ihr immer 2 parallel schalten und den Doppelpack dann 5x in Reihe. Macht 10V bei doppeltem Strom. Die Powerbank lädt so doppelt so schnell. Strom mit dem entweder die Powerbank oder der Adapter nichts anfangen können bleibt einfach in den Solarmodulen.\n\n![6.jpg](https://steemitimages.com/DQmcQu8mWnDJbjFpDKUa2qPp1iRY17JzZeGGQpRdQGVkdMq/6.jpg)\n\nSchaltet möglichst gleiche Solarmodule zusammen. Hier sind es diese schmalen Streifen polykristalliner Zellen (blau glänzend). Im Bild darüber sind Dünnschichtmodule (bräunliches Glas) zu sehen. Diese Beiden Typen unterscheiden sich von ihren Eigenschaften so, dass sich im Mischbetrieb kaum Akkuladung ergibt. 12V Dünnschichtmodule mit 12V Polykristallinen Zellen parallel auf den USB-Adapter zu schalten ist dagegen in Ordnung.\n\nViel Spaß\n\nFeuerfluss",
      "json_metadata": "{\"tags\":[\"usbladegeraet\",\"solarladegeraet\",\"solar\",\"eigenbau\",\"handyaufladen\"],\"image\":[\"https://steemitimages.com/DQmVkgPmrwyNczQCzmZgTtGBCf4rqKJ5uCE8mjFhjZbHw79/1.jpg\",\"https://steemitimages.com/DQmV9ywsACWs7kFvyhCQZsVaEnamMiXyJaquUemrVojUVRN/2.jpg\",\"https://steemitimages.com/DQmdVNs6DzXgQsAjdbsMzibRG9MnYxg2KgZDKLwFVy3RuKa/3.jpg\",\"https://steemitimages.com/DQmXzqGzd8cALqSGNWknjsWVWLkSgc7QCX5VHhjP7LvYn5F/4.jpg\",\"https://steemitimages.com/DQmNtiQc5mHKmHnX3NmJy69d4hoAnU2864S3upWen12buPs/5.jpg\",\"https://steemitimages.com/DQmcQu8mWnDJbjFpDKUa2qPp1iRY17JzZeGGQpRdQGVkdMq/6.jpg\"],\"links\":[\"https://steemit.com/powerbank/@feuerfluss/powerbank-eigenbau-aus-alten-handy-akku-s\"],\"app\":\"steemit/0.1\",\"format\":\"markdown\"}"
    }
  ]
}

{
  "trx_id": "5d8b2bd1fbb3266569ac27d40c67030c02468029",
  "block": 19762528,
  "trx_in_block": 13,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-11T01:14:36",
  "op": [
    "vote",
    {
      "voter": "zuryan",
      "author": "feuerfluss",
      "permlink": "powerbank-eigenbau-aus-alten-handy-akku-s",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "071ad70c83fe560e744927f5413e5b777b3c1563",
  "block": 19644886,
  "trx_in_block": 53,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-06T22:57:45",
  "op": [
    "custom_json",
    {
      "required_auths": [],
      "required_posting_auths": [
        "feuerfluss"
      ],
      "id": "follow",
      "json": "[\"follow\",{\"follower\":\"feuerfluss\",\"following\":\"calagnin\",\"what\":[]}]"
    }
  ]
}

{
  "trx_id": "6ec0ed9de52d777f53444e881e46f39811961bb3",
  "block": 19644853,
  "trx_in_block": 30,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-06T22:56:06",
  "op": [
    "custom_json",
    {
      "required_auths": [],
      "required_posting_auths": [
        "feuerfluss"
      ],
      "id": "follow",
      "json": "[\"follow\",{\"follower\":\"feuerfluss\",\"following\":\"calagnin\",\"what\":[\"blog\"]}]"
    }
  ]
}

{
  "trx_id": "565048f09cfad7b3508830c70c7fa8bda5f1cb94",
  "block": 19634201,
  "trx_in_block": 50,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-06T14:03:09",
  "op": [
    "vote",
    {
      "voter": "dmxmaster",
      "author": "feuerfluss",
      "permlink": "have-you-ever-made-your-own-salt",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "311a6625ce8b180b31b674c06b7f5b4697eccb03",
  "block": 19612625,
  "trx_in_block": 23,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-05T20:04:09",
  "op": [
    "vote",
    {
      "voter": "feuerfluss",
      "author": "dmxmaster",
      "permlink": "diy-powerbank-or-powerbank-tutorial",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "9cb9ca60bf7ff80ca82b7b24c0c27a8ecc3a476d",
  "block": 19612500,
  "trx_in_block": 13,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-05T19:57:54",
  "op": [
    "vote",
    {
      "voter": "feuerfluss",
      "author": "antifx",
      "permlink": "what-to-do-with-empty-spools-from-3d-printing",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "1483fcc269ea7bdf1136def47bf0a5b8630d0374",
  "block": 19610046,
  "trx_in_block": 28,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-05T17:55:06",
  "op": [
    "vote",
    {
      "voter": "drmake",
      "author": "feuerfluss",
      "permlink": "powerbank-eigenbau-aus-alten-handy-akku-s",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "ad9760346ed618d8019267c52f3af56b237b2601",
  "block": 19606337,
  "trx_in_block": 34,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-05T14:49:33",
  "op": [
    "vote",
    {
      "voter": "dmxmaster",
      "author": "feuerfluss",
      "permlink": "powerbank-eigenbau-aus-alten-handy-akku-s",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "a6d2ec6d9d2a03b0e2fa596d3e403ab4e16eb29a",
  "block": 19587138,
  "trx_in_block": 10,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-04T22:49:12",
  "op": [
    "vote",
    {
      "voter": "zapper",
      "author": "feuerfluss",
      "permlink": "powerbank-eigenbau-aus-alten-handy-akku-s",
      "weight": 100
    }
  ]
}

{
  "trx_id": "ce2b1a6c04ae93e9b52c588b7f2be25cc73da28a",
  "block": 19586777,
  "trx_in_block": 42,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-04T22:31:06",
  "op": [
    "custom_json",
    {
      "required_auths": [],
      "required_posting_auths": [
        "feuerfluss"
      ],
      "id": "follow",
      "json": "[\"follow\",{\"follower\":\"feuerfluss\",\"following\":\"pazor\",\"what\":[]}]"
    }
  ]
}

{
  "trx_id": "3cf90d1f50105cabda6e05f91a0cfa959da1408e",
  "block": 19586748,
  "trx_in_block": 26,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-04T22:29:39",
  "op": [
    "custom_json",
    {
      "required_auths": [],
      "required_posting_auths": [
        "feuerfluss"
      ],
      "id": "follow",
      "json": "[\"follow\",{\"follower\":\"feuerfluss\",\"following\":\"pazor\",\"what\":[\"blog\"]}]"
    }
  ]
}

{
  "trx_id": "942d1877f9298cfdacd46060d1c3d790b729ff08",
  "block": 19586619,
  "trx_in_block": 51,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-02-04T22:23:12",
  "op": [
    "comment",
    {
      "parent_author": "",
      "parent_permlink": "powerbank",
      "author": "feuerfluss",
      "permlink": "powerbank-eigenbau-aus-alten-handy-akku-s",
      "title": "Powerbank Eigenbau aus alten Handy-Akku´s",
      "body": "Wenn der Akku vom Handy nicht mehr über den Tag kommt, muss ein neuer her. Der Alte ist für´s Recycling aber noch zu schade. \nMit mehreren solcher Akku´s lässt sich eine Powerbank bauen. Wenn ein alter Akku auch nur  die Hälfte seiner ursprünglichen Kapazität hat, lässt sich mit mehreren solcher Akku´s in einer Powerbank ein Handy oder Tablett noch mehrmals laden.\nDie Elektronik stammt von einer Do-It-Yourself (DIY) Powerbank. Die kann man in Asien ab etwa 2 Euro bestellen. Auch hier gibt es die online und im Laden z.B. als Schlüsselanhänger-Minipowerbank für eine 18650er Rundzelle.\n![1.jpg](https://steemitimages.com/DQmNys9P7MUxgHqQVRB7GDjBMwSmxjqAfPVdShyXFPUNdJk/1.jpg)\nIch habe an die Anschlüsse der Akku´s Drähte gelötet. Vor dem Verbinden mehrerer Akkus müssen die exakt die gleiche Spannung haben. Das lässt sich erreichen, indem jeder Akku mit der Elektronik der Powerbank voll aufgeladen wird. Ich habe die Spannung noch mit einem Messgerät geprüft, da manche defekten Akkus nicht die volle Spannung erreichen. Dann habe ich den Minuspool der Akkus verbunden und zusätzlich für ein paar Minuten zwischen den Pluspol von zwei Akkus einen kleinen Widerstand von etwa 10 Ohm gehängt. Anschließend den Widerstand heraus genommen und Plus dieser Akkus verbunden. Nun den nächsten Akkus erst kurz mit, und dann ohne Widerstand eingebunden bis alle Akkus parallel geschaltet waren.\n![2.jpg](https://steemitimages.com/DQmVJcvM4EiUXsPCaahkAHRSrDq1SYqUrRH7wEeea1tdubL/2.jpg)\nZwischen die Akkus habe ich als Abstandshalter mit Klebeband Deckel von Getränkekartons geklebt. Ich wollte nicht, dass die Akkus dicht an dicht liegen und sich dadurch stärker erwärmen.\n![3.jpg](https://steemitimages.com/DQmcg5iAxt3PFbBXezppDQ8xWRUKuKoFbc53hvi7fSyNXfd/3.jpg)\nWenn ihr das nachbauen wollt, dann nehmt nur Akkus die in Ordnung sind. Das Handy muss mit dem alten Akku noch ein paar Stunden durchgehalten haben. Nehmt auf keinen Fall Akku´s die aufgebläht sind, oder mit denen das Handy nicht mehr startet. Behaltet die Powerbank die ersten  Lade- und Entladezyklen im Auge. Achtet darauf, dass kein Akku wärmer wird, als die Anderen. Falls doch, sortiert ihn aus. - Baut die Powerbank nur nach, wenn ihr wisst was ihr tut.\n\nViel Spaß\n\nFeuerfluss",
      "json_metadata": "{\"tags\":[\"powerbank\",\"reserveakku\",\"energie\",\"diy\",\"eigenbau\"],\"image\":[\"https://steemitimages.com/DQmNys9P7MUxgHqQVRB7GDjBMwSmxjqAfPVdShyXFPUNdJk/1.jpg\",\"https://steemitimages.com/DQmVJcvM4EiUXsPCaahkAHRSrDq1SYqUrRH7wEeea1tdubL/2.jpg\",\"https://steemitimages.com/DQmcg5iAxt3PFbBXezppDQ8xWRUKuKoFbc53hvi7fSyNXfd/3.jpg\"],\"app\":\"steemit/0.1\",\"format\":\"markdown\"}"
    }
  ]
}

{
  "trx_id": "f26a4eaafb51ca781c635080420a58356511fab8",
  "block": 18939463,
  "trx_in_block": 30,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-01-13T10:38:36",
  "op": [
    "vote",
    {
      "voter": "feuerfluss",
      "author": "alao",
      "permlink": "how-to-trade-byteball-gbyte",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "b8f0677d58ae6c759d4d693421fdd7503932e401",
  "block": 18695206,
  "trx_in_block": 41,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-01-04T22:53:57",
  "op": [
    "comment",
    {
      "parent_author": "",
      "parent_permlink": "salt",
      "author": "feuerfluss",
      "permlink": "have-you-ever-made-your-own-salt",
      "title": "Have you ever made your own salt?",
      "body": "Have you ever made your own salt?\nIf you make holiday at seaside you are close to the source.\nWhile swimming i took an empty bottle with me an filled it with seawater.\nBack at accomodation i filled it into empty water can´s i cuted before into two parts.\nIt´s a good exercise to lern patience. You will get a souvenir that remember you to these happy day´s when you are back at home and you are cooking with your own salt.\n\n![1.jpg](https://steemitimages.com/DQmf7whVzEusqDCFSi8PojSifLkGebqao24mKREKK83G1Ji/1.jpg)\n\nEverything else is done by the sun. Here my harvest after refilling my little salina a view times. If it will not become dry don´t worry. You can spice your food same good with seawater from a bottle then with dry salt.\n\n![2.jpg](https://steemitimages.com/DQmcWMaYRk4bmadHGWSsEYa63gu3TZrGYByYgyyHvwxRt6o/2.jpg)\n\nFinaly a image how it will be done in larger amounts. They produce just in summer. Else the sun will not have enough power to dry the salt. This salina is in the south of La Palma iseland. You can see a volcano in the background.  \n\n![3.jpg](https://steemitimages.com/DQmRgRN2vQPeE64dk6JACz6R4AvZzoNBWQfNR5H2GaJz37U/3.jpg)\n\nHave fun\n\nF.",
      "json_metadata": "{\"tags\":[\"salt\",\"howto\",\"holiday\"],\"image\":[\"https://steemitimages.com/DQmf7whVzEusqDCFSi8PojSifLkGebqao24mKREKK83G1Ji/1.jpg\",\"https://steemitimages.com/DQmcWMaYRk4bmadHGWSsEYa63gu3TZrGYByYgyyHvwxRt6o/2.jpg\",\"https://steemitimages.com/DQmRgRN2vQPeE64dk6JACz6R4AvZzoNBWQfNR5H2GaJz37U/3.jpg\"],\"app\":\"steemit/0.1\",\"format\":\"markdown\"}"
    }
  ]
}

{
  "trx_id": "f55a222b6874297451700eb57a81a0c98c3d9091",
  "block": 18689633,
  "trx_in_block": 36,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-01-04T18:15:09",
  "op": [
    "vote",
    {
      "voter": "feuerfluss",
      "author": "steemitboard",
      "permlink": "steemitboard-notify-feuerfluss-20180104t065246000z",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "f274daf7979191b6c4ae9d369098ead8ce3b9c4b",
  "block": 18675988,
  "trx_in_block": 27,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-01-04T06:52:45",
  "op": [
    "comment",
    {
      "parent_author": "feuerfluss",
      "parent_permlink": "verruecktes-valentinsgeschenk",
      "author": "steemitboard",
      "permlink": "steemitboard-notify-feuerfluss-20180104t065246000z",
      "title": "",
      "body": "Congratulations @feuerfluss! You have completed some achievement on Steemit and have been rewarded with new badge(s) :\n\n[![](https://steemitimages.com/70x80/http://steemitboard.com/notifications/firstpost.png)](http://steemitboard.com/@feuerfluss) You published your First Post\n[![](https://steemitimages.com/70x80/http://steemitboard.com/notifications/firstvote.png)](http://steemitboard.com/@feuerfluss) You made your First Vote\n[![](https://steemitimages.com/70x80/http://steemitboard.com/notifications/firstvoted.png)](http://steemitboard.com/@feuerfluss) You got a First Vote\n\nClick on any badge to view your own Board of Honor on SteemitBoard.\nFor more information about SteemitBoard, click [here](https://steemit.com/@steemitboard)\n\nIf you no longer want to receive notifications, reply to this comment with the word `STOP`\n\n> By upvoting this notification, you can help all Steemit users. Learn how [here](https://steemit.com/steemitboard/@steemitboard/http-i-cubeupload-com-7ciqeo-png)!",
      "json_metadata": "{\"image\":[\"https://steemitboard.com/img/notifications.png\"]}"
    }
  ]
}

{
  "trx_id": "6877d8e24c5cc292610d0ac015265dae6a30d4cb",
  "block": 18667212,
  "trx_in_block": 10,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-01-03T23:33:51",
  "op": [
    "vote",
    {
      "voter": "feuerfluss",
      "author": "shabbirahmad",
      "permlink": "my-favourite-things-about-visiting-new-cities-is-the-street-art-glasgow-scotland-or-it-s-most-glorious-city-in-the-world",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "a51f48d8b26dee650d40754c132727f22f3bc979",
  "block": 18667187,
  "trx_in_block": 35,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-01-03T23:32:36",
  "op": [
    "vote",
    {
      "voter": "feuerfluss",
      "author": "jawadovic",
      "permlink": "some-pictures-are-worth-a-thousand-words",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "9ebc1e5be3119d1f3e99656b5c400c245560154f",
  "block": 18666184,
  "trx_in_block": 14,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-01-03T22:42:27",
  "op": [
    "vote",
    {
      "voter": "zapper",
      "author": "feuerfluss",
      "permlink": "free-etherbtc-token",
      "weight": 300
    }
  ]
}

{
  "trx_id": "08e7202028f33d6459a7d299d644729a69115d3f",
  "block": 18665963,
  "trx_in_block": 27,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-01-03T22:31:24",
  "op": [
    "comment",
    {
      "parent_author": "",
      "parent_permlink": "crypto",
      "author": "feuerfluss",
      "permlink": "verruecktes-valentinsgeschenk",
      "title": "Verrücktes Valentinsgeschenk?",
      "body": "Hallo,\n\nbei etherbtc.io gibt es bis Valentin (14.2.2018) Token gratis. \nhttp://clicks.aweber.com/y/ct/?l=4wsai&m=kXm5gJ19ts1YO_2&b=zOM_3CjHO4gBuOGJ7OF0fg\nWenn ihr also bei myetherwallet.com eine Wallet für den Empfang anlegt, dann könnt ihr die gleich mit Startkapital verschenken! - Wenn ihr noch ein oder zwei Ether dazu überweist, dann wird es garantiert ein erfolgreicher Start in die Cryptowelt ;-)\n\nViel Spaß\n\nFeuerfluss",
      "json_metadata": "{\"tags\":[\"crypto\",\"airdrop\",\"valentin\"],\"links\":[\"http://clicks.aweber.com/y/ct/?l=4wsai&m=kXm5gJ19ts1YO_2&b=zOM_3CjHO4gBuOGJ7OF0fg\"],\"app\":\"steemit/0.1\",\"format\":\"markdown\"}"
    }
  ]
}

{
  "trx_id": "e3a84e90e22d4277b1b841f42d5c946edb114afd",
  "block": 18665818,
  "trx_in_block": 16,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-01-03T22:24:06",
  "op": [
    "vote",
    {
      "voter": "mgilly",
      "author": "feuerfluss",
      "permlink": "free-etherbtc-token",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "674380a8516bcb3dcf8eb4bf3292173d13b3bf94",
  "block": 18665785,
  "trx_in_block": 12,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-01-03T22:22:27",
  "op": [
    "comment",
    {
      "parent_author": "",
      "parent_permlink": "crypto",
      "author": "feuerfluss",
      "permlink": "free-etherbtc-token",
      "title": "FREE EtherBTC TOKEN",
      "body": "hello  to everyone,\nFREE TOKEN ALERT!  Receive FREE EtherBTC!  I just registered for the EtherBTC 2018 Airdrop and you can, too!  Go to \nhttp://clicks.aweber.com/y/ct/?l=4wsai&m=kXm5gJ19ts1YO_2&b=zOM_3CjHO4gBuOGJ7OF0fg\nor click\nhttps://etherbtc.io\nFor Airdrop you have to register by mail and ethereum address. Then send 3 links to articles like this one. - Thats it.\n\nHave fun",
      "json_metadata": "{\"tags\":[\"crypto\",\"airdrop\",\"token\"],\"links\":[\"http://clicks.aweber.com/y/ct/?l=4wsai&m=kXm5gJ19ts1YO_2&b=zOM_3CjHO4gBuOGJ7OF0fg\",\"https://etherbtc.io\"],\"app\":\"steemit/0.1\",\"format\":\"markdown\"}"
    }
  ]
}

{
  "trx_id": "ff737f7eed8340cc250f151a67b082243be72b3f",
  "block": 18665397,
  "trx_in_block": 34,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-01-03T22:03:03",
  "op": [
    "vote",
    {
      "voter": "alexiii",
      "author": "feuerfluss",
      "permlink": "etherbtc-token-am-valentinstag",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "888fbfe69c30937a4ffb24d8bf4426873ccc0d74",
  "block": 18665347,
  "trx_in_block": 26,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-01-03T22:00:33",
  "op": [
    "comment",
    {
      "parent_author": "",
      "parent_permlink": "crypto",
      "author": "feuerfluss",
      "permlink": "etherbtc-token-am-valentinstag",
      "title": "EtherBTC Token am Valentinstag",
      "body": "Hallo Steemer,\n\nwer sich bis Valentin (14.2.2018) mit Mail und Ethereum Wallet Adresse registriert bekommt EtherBTC Token.\n\n http://clicks.aweber.com/y/ct/?l=4wsai&m=kXm5gJ19ts1YO_2&b=zOM_3CjHO4gBuOGJ7OF0fg\n\nEinzige zusätzliche Aufgabe: Die Werbetrommel rühren, was ich hiermit schon fast erfüllt habe.\n\nLiebe Grüße\n\nFeuerfluss",
      "json_metadata": "{\"tags\":[\"crypto\",\"ico\",\"airdrop\"],\"links\":[\"http://clicks.aweber.com/y/ct/?l=4wsai&m=kXm5gJ19ts1YO_2&b=zOM_3CjHO4gBuOGJ7OF0fg\"],\"app\":\"steemit/0.1\",\"format\":\"markdown\"}"
    }
  ]
}

{
  "trx_id": "bbf781310d388ac3d0f334afa3da84c96e6f1faa",
  "block": 18663974,
  "trx_in_block": 40,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2018-01-03T20:51:54",
  "op": [
    "vote",
    {
      "voter": "feuerfluss",
      "author": "ghaaspur",
      "permlink": "airdrop-forecast-december-2017-january-2018-2017125t14350826z",
      "weight": 10000
    }
  ]
}

{
  "trx_id": "be7d86b5606f8686c4f822444dca081c5a0d8207",
  "block": 18032683,
  "trx_in_block": 43,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2017-12-12T22:25:00",
  "op": [
    "delegate_vesting_shares",
    {
      "delegator": "steem",
      "delegatee": "feuerfluss",
      "vesting_shares": "29734.859370 VESTS"
    }
  ]
}

{
  "trx_id": "cd3d59ecea36f34dde64c7ef1a4910d51bb6a106",
  "block": 15009689,
  "trx_in_block": 9,
  "op_in_trx": 0,
  "virtual_op": 0,
  "timestamp": "2017-08-29T21:40:06",
  "op": [
    "account_create_with_delegation",
    {
      "fee": "0.500 STEEM",
      "delegation": "57000.000000 VESTS",
      "creator": "steem",
      "new_account_name": "feuerfluss",
      "owner": {
        "weight_threshold": 1,
        "account_auths": [],
        "key_auths": [
          [
            "STM6w2G3uS8YnWv9avHbsHnK6S9WvWPgcS5Ku712aLzKvGYajbgmC",
            1
          ]
        ]
      },
      "active": {
        "weight_threshold": 1,
        "account_auths": [],
        "key_auths": [
          [
            "STM72PAyzd15K6VTbFiQmCszjD2MeDFoxSpLUY3ihhHGJfJn6Sf1k",
            1
          ]
        ]
      },
      "posting": {
        "weight_threshold": 1,
        "account_auths": [],
        "key_auths": [
          [
            "STM7PJN9p1s2f3WFJLZM8b9mWTKmxL591px4hstfTQjpDqsSHUTYR",
            1
          ]
        ]
      },
      "memo_key": "STM61GRSeGevU5CJtbNGTWoDuJM5fJTqSFAYfEfM2q8dtfQWdLrg9",
      "json_metadata": "",
      "extensions": []
    }
  ]
}